field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Steelhaus Technologies is seeking an Electrical Engineer (Contractor) to support an ongoing project on a contract basis. This role is expected to require approximately&nbsp;800 hours of work over the duration of the contract. The successful candidate will apply their technical expertise in electrical engineering to deliver high-quality solutions, collaborate with internal teams, and ensure project milestones are met.Key Responsibilities<ul><li>Design, develop, and optimize electronic circuits and hardware systems for various applications</li><li>Collaborate with software and firmware teams to integrate hardware and software seamlessly</li><li>Conduct feasibility studies and evaluate component and system-level performance to meet design specifications</li><li>Lead the prototyping, testing, and validation of electronic systems, ensuring compliance with industry standards and regulations</li><li>Troubleshoot and resolve technical challenges during the design and development process</li><li>Conduct risk assessments and implement mitigation strategies to ensure project success</li><li>Document designs, processes, and test results to facilitate knowledge sharing and product certification</li></ul>Qualifications<ul><li>Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering, or a related field</li><li>3+ years of experience designing and developing electronic devices and systems</li><li>Strong knowledge of analog and digital circuit design, including PCB layout and simulation tools (e.g., Altium, Eagle, SPICE)</li><li>Proficiency in using electronic test equipment such as oscilloscopes, signal generators, and spectrum analyzers</li><li>Experience in embedded systems design and programming (e.g., C/C++, Python) is a plus</li><li>Familiarity with regulatory and certification requirements for electronic devices (e.g., FCC, CE, ISO)</li><li>Excellent problem-solving skills and the ability to work independently or within a team</li><li>Strong communication skills to articulate technical concepts to stakeholders</li></ul>Benefits &amp; Perks of Working With Us<ul><li>Opportunity to work on cutting-edge technologies with real-word impact</li><li>Full comprehensive benefits package including extended health and dental care and wellness and health spending accounts</li><li>Company contribution to your Retirement Savings Plan (RSP)&nbsp;</li><li>Collaborative and innovative work environment</li><li>Professional development opportunities to grow your career</li></ul>All applicants are thanked for their interest.Steelhaus Technologies Inc. is an equal opportunity employer.&nbsp;Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

Electrical Engineer

About the RoleWe are seeking out a General Operator to join our Pangea Screen team. The successful candidate will be responsible for supporting the Direct Wire Wrap operations, while also supporting various aspects around the manufacturing shop including deburr, punch slot, shroud weld, shroud installation, end ring operations.Position Details:<ul><li>Contract: 3-month</li><li>Shift: Day, Graveyard, Weekend</li><li>Location: Calgary, AB (NE Area)&nbsp;</li></ul>Duties and Responsibilities &nbsp;Direct Wire Wrap &nbsp;Health and Safety**The equipment used in this process may interfere with electronic medical implants, DO NOT APPLY if you have an electronic medical implant**<ul><li>Securing pipes on Direct Wire Wrap machine, selecting the correct gauge and shape, and ensuring wire cuts are accurate.</li><li>Selecting correct Wrap Program on the machine according to the customer order, conduct wrap process, and monitor the wrap coil and sizing.</li><li>Monitoring the entire wrap process from start to end to ensure wrap coil does not twist or move out of correct spacing.</li><li>Conduct Gap Checks at each regular interval to ensure they are conforming and accurate.</li><li>Perform in-process inspection of machined components with company provided Quality Control measuring equipment.</li><li>Utilize Lucid system to track quality data on current products.</li></ul>Deburr<ul><li>Conduct accurate measurements, confirm inside and outside dimensions and ensure raw material matches within the Lucid system.</li><li>Charge out deburr head and operate the deburr machine.</li><li>Inspect the ID of pipe to confirm the deburr head is performing its function.</li><li>Remove any broken of drill heads from pipe and ensuring the pipe is free of deburr. &nbsp;</li></ul>Shroud Weld<ul><li>Monitor the shroud welding machine.</li><li>Perform and ensure each shroud passes in process quality inspection.</li><li>Adjust when required to keep product in tolerance.</li><li>Log all data in the lucid quality system.</li><li>Confirm each shroud is marked for traceability purposes.</li></ul>Shroud Installation<ul><li>Position shroud and pipe on the shroud pull conveyor system.</li><li>Pull shroud onto pipe using the hydraulic drive.</li><li>Confirm the shroud and pipe have been fitted with end rings and the shroud crimped with shroud crimper in proper location.</li></ul>End Ring Weld<ul><li>Ensure proper end rings are on the pipe and in position.</li><li>Follow the Pre, Post and Weld procedures that have been created.</li><li>Conducting checks to guarantee assigned equipment is operating correctly and in good working order.</li></ul>Other Duties<ul><li>Ensuring all data is accurately entered into the Lucid system, logging data to confirm the procedure has been completed and achieved its results.</li><li>Conducting checks to guarantee assigned equipment is operating correctly and in good working order.</li><li>Liaise with the Quality Control Team, Shipping/Receiving, and other employees, and supervisors.</li><li>Maintaining the assigned work area clean and free from hazards.</li><li>Adhering to health and safety protocols including always wearing proper Personal Protective Equipment (PPE).</li></ul>&nbsp;Required Abilities, Knowledge, Experience<ul><li>Basic computer skills and ability to navigate through Lucid System.</li><li>Demonstrated ability to work to exact drawing and order specifications an asset.</li><li>Ability to read and follow instruction from order on Lucid System.</li><li>Team player with strong verbal and written communication skills.</li><li>Demonstrates strong attention to detail in order to create highest quality level products.</li><li>Experience using various hand tools and equipment including forklift and hand cutting tools for steel plates an asset.</li><li>Knowledge or experience utilizing Quality Control equipment including casing drift, calipers, feeler gauge/microscope, and shroud bend test machine an asset.</li><li>Experience using measuring equipment an asset.</li><li>Possesses effective time management skills and efficiency.</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

General Operator (DWW)

Job SummaryThe Quality Control Inspector will be performing first-off, in-process, and final inspections of Steelhaus products. The Quality Control Inspector will coordinate with other departments including assembly, manufacturing and shipping/receiving. &nbsp;Position DetailsStatus: 3-month contractLocation: Calgary, NEDuties and Responsibilities<ul><li>Protecting their own and others’ health and safety at or in the vicinity of the work site.</li><li>Cooperating with their employer or supervisor by following health and safety rules for the job.</li><li>Using all hazard controls and wearing personal protection equipment designated or provided by the employer or required by the OHS legislation.</li><li>Refraining from causing or participating in harassment and violence.</li><li>Reporting health and safety concerns and conditions to their employer or supervisor.</li><li>Participating in any training provided by the employer.</li><li>Cooperating with any person exercising a duty under the OHS legislation.</li><li>Communication with their colleagues, supervisors, and managers.</li><li>Prepping equipment prior to inspection.</li><li>Verifying dimensions of parts machined using micrometers, calipers, other precision measuring instruments.</li><li>Perform first article inspections on all product runs.</li><li>Perform final quality inspection and dimensional inspection, verification of marking of manufactured parts and components.</li><li>Verify MTR heat numbers as defined on manufacturing travelers.</li><li>Initiate Nonconformance reports (NCRs) for all parts that do not meet requirements.</li><li>Identify and segregate NCR parts.</li><li>Assist in the maintenance of the NCR Area as required, and ensure parts are identified.</li><li>Identify tools requiring calibration and perform calibration of measurement tools.</li><li>Maintain emails, perform photocopying and printing.</li><li>Responsible to identify needs for consumables.</li></ul>Required Abilities, Knowledge, Experience<ul><li>Demonstrate understanding of parts drawings and GD&amp;T.</li><li>2+ Years in a similar role.</li><li>2+ Years experience in a machining or assembly shop environment.</li><li>Demonstrate experience using a variety of hand inspection tools.</li><li>Experience with specialized measuring instruments preferred, such as:<ul><li>Surface Finish Gauge,</li><li>Wall Thickness Gauge.</li></ul></li><li>CMM is preferred.</li><li>Able to demonstrate basic computer skills (MS Office).</li></ul>All applicants are thanked for their interest &nbsp;Steelhaus Technologies Inc. is an equal opportunity employer. &nbsp; Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

Quality Control Inspector

About&nbsp;UsSteelhaus Technologies Inc. became one of the fastest growing completions company since its establishment in 2008. Steelhaus boldly drives the market with innovative energy solutions; fusing practical, field-proven experience, adaptable engineering, integrated manufacturing, and uncompromising safety with relentless delivery of unwavering customer service. &nbsp;Through continuous growth and a collective of “Can Do” attitudes, we’ve created an environment that allows our people to thrive, to learn, to develop and move forward. &nbsp;About the RoleThe CNC Technician Level 1 will be responsible for loading programs into the CNC machine, operating a CNC Lathe and Mill, maintaining Quality and Safety Standards, keeping records, and maintaining equipment and supplies.Position Details<ul><li>Status: 3-month Contract</li><li>Available Shifts:<ul><li>Day (Mon-Thurs, 6:00 AM - 4:00 PM)</li><li>Afternoon (Mon-Thurs, 4:00 PM - 2:00 AM)</li><li>Weekend (Fri-Sun, 6:00 AM - 6:00 PM)</li></ul></li><li>Location: Calgary, AB (NE Area)</li></ul>Duties and Responsibilities<ul><li>Operation of CNC Lathe/Mill, navigation of machine control and preforming tool wear offset adjustments</li><li>Reading and understanding the traveler document</li><li>Loading the material into the CNC machine in a correct and safe manner.</li><li>Managing the raw materials basket by making accurate measurements to verify the correct material size</li><li>Performing machine inspection and basic maintenance tasks to ensure proper functioning of a CNC machine</li><li>Recognizing broken tooling and inserts during operation.</li><li>Utilization of tools and equipment including measuring tools, hand tools, power &amp; pneumatic tools, and operating a pallet jack</li><li>Locating and identifying the correct inserts</li><li>Replacing inserts and tools using the proper technique</li><li>Maintaining chip conveyors by identifying chip blockages and safely removing any that should incur</li><li>Identified burrs on part and safely removing them</li><li>Finishing work pieces and performing quality control checks through reading technical drawings and blueprints and using key measuring tools</li><li>Measuring in-process and final part against drawing</li><li>Correctly handling finished materials</li><li>Performing routine housekeeping around the shop</li><li>Adhering to health and safety protocols including always wearing proper Personal Protective Equipment (PPE) and personally acquiring them from available sources (i.e., vending machine)</li><li>Occasional photocopying, printing, and other job duties assigned as required</li></ul>Knowledge, Skills, and Abilities<ul><li>Working knowledge and previous experience with operating a CNC Lathe and Mill&nbsp;</li><li>Possess mechanical and technical skills to effectively operate and troubleshoot a CNC machine independently</li><li>Ability to read technical drawings and printings and utilize key measuring tools</li><li>Experience with utilizing various hand tools and understanding machine utilization capacity and tooling capabilities</li><li>Ability to navigate the control panel&nbsp;</li><li>Strong communication skills to effectively interact with employees and supervisors</li><li>Ability to work both independently and as a part of a team</li><li>Capable of moving heavy equipment, materials, and supplies up to 23 kg (50lbs)</li><li>Previous knowledge or experience of oil and gas specific threads is an asset</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

CNC Technician

About&nbsp;UsSteelhaus Technologies Inc. became one of the fastest growing completions company since its establishment in 2008. Steelhaus boldly drives the market with innovative energy solutions; fusing practical, field-proven experience, adaptable engineering, integrated manufacturing, and uncompromising safety with relentless delivery of unwavering customer service. &nbsp;Through continuous growth and a collective of “Can Do” attitudes, we’ve created an environment that allows our people to thrive, to learn, to develop and move forward.About the Role &nbsp;We are seeking an enthusiastic Shop Hand to join our team! This position will be responsible for identifying moving parts within the shop to ensure efficient production flow and support for assembly technicians. This role involves monitoring inventory levels and reporting on materials. The Shop Hand will assist in the assembly of tools while ensuring compliance with quality control standards.&nbsp;Position Details<ul><li>Position Status: Full-Time, Contract (3-months)</li><li>Location: Calgary, AB</li><li>Shift: Weekdays (Monday to Friday, 7:00 am to 3:00 pm)</li></ul> &nbsp;Duties and Responsibilities &nbsp;<ul><li>Identifying parts to be put into production line. &nbsp;</li><li>Ensuring work packages are attached to the correct basket. &nbsp;</li><li>Loading rollers with baskets including putting a tray on the rollers. &nbsp;</li><li>Receiving, picking, and sorting office supplies, parts, tools, and magnesium stock. &nbsp;</li><li>Conducting Pre-Use Inspections of mobile equipment. &nbsp;</li><li>Operating equipment including hand tools, pallet jack, and forklift, crane. &nbsp;</li><li>Assist in the assembly of tools, focusing on O-rings, seals, set screws, and sleeves. &nbsp;</li><li>Ensure compliance with quality control standards in preparing tools for assembly, testing, and shipping.</li><li>Manual and mechanical lifting/moving equipment, materials, and supplies which can include setting up and operating. &nbsp;</li><li>Performing routine housekeeping around the shop. &nbsp;</li><li>Occasional photocopying, printing, and other job duties assigned as required. &nbsp;</li><li>Cooperating with their employer or supervisor by following health and safety rules for the job. &nbsp;</li><li>Participating in any training provided by the employer. &nbsp;</li><li>Using all hazard controls and wearing personal protection equipment&nbsp;designated&nbsp;or provided by the employer or required by the OHS legislation. &nbsp;</li><li>Cooperating with any person exercising a duty under the OHS legislation. &nbsp;</li></ul> &nbsp;Knowledge, Skills, and Abilities<ul><li>Shipping and receiving experience. &nbsp;</li><li>Basic computer skills and ability to navigate through shipping app and SharePoint. &nbsp;</li><li>Experience with utilizing various hand tools. &nbsp;</li><li>Capable of moving heavy equipment, materials, and supplies up to 23 kg (50 lbs). &nbsp;</li><li>Ability to work both independently and as a part of a team. &nbsp;</li><li>Ability to communicate effectively with co-workers. &nbsp;</li></ul> All applicants are thanked for their interest.Steelhaus Technologies Inc. is an equal opportunity employer.&nbsp;Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

Shop Hand

About the RoleThe Saw Technician – Rotating and Band Saw will be responsible for all the components of completing a Manufacturing Order accurately. Additionally, they will ensure the saws are maintained and calibrated to guarantee optimal performance and product quality.Position DetailsStatus: 3-month ContractShift: Afternoons (Monday - Thursday, 4pm - 2am)Location: Calgary NEDuties and Responsibilities<ul><li>Protecting their own and others’ health and safety at or in the vicinity of the work site.</li><li>Cooperating with their employer or supervisor by following health and safety rules for the job.</li><li>Using all hazard controls and wearing personal protection equipment designated or provided by the employer or required by the OHS legislation.</li><li>Refraining from causing or participating in harassment and violence.</li><li>Reporting health and safety concerns and conditions to their employer or supervisor.</li><li>Participating in any training provided by the employer.</li><li>Cooperating with any person exercising a duty under the OHS legislation.</li><li>Communication with their colleagues, supervisors, and managers.</li><li>Reading and understanding the specifications on the Manufacturing Order including:<ul><li>Matching Heat numbers to Material Test Report</li><li>Verifying required dimensions to Material Test Report.</li></ul></li><li>Identifying the required cut length measurement and selecting the suitable saw.</li><li>Performing pre-use inspections of all machinery and tools to be used.</li><li>Measuring and cutting raw steel accurately to ensure the appropriate length requirements from the Manufacturing Order.</li><li>Regularly operating equipment (Forklift, CNC Band, CNC Rotating Saw, Overhead Crane and rigging).</li><li>Positioning forklift baskets in the correct location.</li><li>Ensuring all requirements for shipping are met including:<ul><li>Securing parts onto a pallet,</li><li>Ensuring materials do not exceed weight limits,</li><li>Ensuring the correct documentation accompanies materials,</li><li>Safely loading materials on the truck.</li></ul></li><li>Responsible for understanding the CNC saws maximum capabilities.</li></ul>Required Abilities, Knowledge, Experience<ul><li>Display working knowledge and previous experience operating Band saw, Cold saw, Forklift.</li><li>Safely operate a forklift as per manufacturers parameters.</li><li>Understand basket weight restrictions for equal weight distribution and safe lifting techniques.</li><li>Able to communicate effectively with employees and supervisors.</li><li>Able to work both independently and as a part of a team.</li><li>Able to lift heavy parts up to 23 kg (50lbs).</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

Saw Technician

About the RoleThe Maintenance Technician will be responsible for providing skilled labour for Steelhaus business units and facilities. This role will be responsible for the performing maintenance in a safe manner, and to manufacturer specifications and recommendations to ensure equipment is operating as intended.Position Details:&nbsp; &nbsp;<ul><li>Shift: Friday to Sunday, 12 hour shifts &nbsp;</li><li>Location: NE, Calgary AB</li></ul>Duties and ResponsibilitiesGeneral Maintenance<ul><li>Troubleshoot and perform repairs to buildings, equipment, and systems.<ul><li>CNC Machines (Mill, Lathe, Punch Press, Drill, etc.)</li><li>Air compressors</li><li>Material handling systems</li></ul></li><li>Mechanical systems</li><li>Hydraulic systems</li><li>Electrical systems</li><li>General plumbing</li><li>Work with facility management to schedule repairs</li><li>Conduct necessary research and find answers independently.</li></ul>Preventative Maintenance and troubleshooting<ul><li>Perform complex inspections of internal components and assess future needs</li><li>Maintain equipment by completing preventive maintenance activities, following manufacturers and internal instructions as required.</li><li>Improve equipment reliability</li><li>Identify opportunities to improve existing PM program</li><li>Identify root cause of equipment related issues and incorporate potential prevention measures as part of the PM schedule.</li><li>Maintain Log of issues, resolutions and completed work orders</li></ul> &nbsp;General<ul><li>Use electrical/electronic diagnostic equipment such as multi-meters, infrared scanning equipment and other tools as necessary for servicing applicable equipment.</li><li>Identify issues that cannot be resolved by internal resources and coordinate with alternative service providers to have these issues resolved.</li><li>Read diagrams, schematics, reports, and manuals</li><li>Use maintenance software &nbsp;</li></ul>Other duties and responsibilities<ul><li>Identify / report hazards and fulfill all Health &amp; Safety, WHMIS, MSDS, and company policy requirements</li><li>While the job may primarily be during the day, working later in the day/evening and/or on weekends might be required depending on the urgency of the repair</li><li>Cleans and maintains work areas and shop equipment</li></ul> &nbsp;Required Abilities, Knowledge, Experience<ul><li>High School Diploma, GED and 3-5 years equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).</li><li>Completion of an accredited apprenticeship program</li><li>Formal training or 2+ years of ventilation system maintenance experience</li><li>Working knowledge of hydraulic systems under 3000psi</li><li>Experience with air compressors, and compressed air systems</li><li>Ability to read and interpret documents and drawings (e.g., blueprints, manuals, wiring diagrams etc.)</li><li>Exhibit good time management skills and ability to prioritize workflow throughout the day.</li><li>Strong verbal and written English language communication skills.</li><li>'Hands-on self-starter with ability to work both independently and as part of a team</li><li>Must be able to lift, up to 23 kg (50 lbs)</li><li>Valid Class 5 driver’s license and reliable transportation</li></ul> &nbsp;What we Offer<ul><li>Full comprehensive benefits package including extended health and dental care</li></ul>

Maintenance Technician

About the RoleThe CNC Technician will be responsible for the safe and responsible operation of a CNC lathe and/or CNC Mill. A level 1 technician is responsible for the machine while operating, material loading/unloading, finished part dimensions and condition while strictly adhering to all company safety and quality program policies and standards. &nbsp;Position DetailsStatus: 3-Month ContractShift: Afternoons (Monday - Thursday, 4pm - 2am)Location: Calgary N.E.Duties and Responsibilities &nbsp;<ul><li>Safe and responsible operation of a CNC Lathe and/or a CNC Mill.</li><li>Responsible for machinery and tool pre-use inspection and identification of damage, deficiencies, and abnormalities.</li><li>Reporting any changes to machine, program, tooling, or inserts to supervisor.</li><li>Prevention of damage to machine and/or parts that may be caused by error, malfunction, or breakdown.</li><li>Responsible for raw material management:<ul><li>&nbsp;Maintain accurate counts,</li><li>&nbsp;Verification of correct materials,</li><li>&nbsp;Manage material or specification changes.</li></ul></li><li>Loading the material into the CNC machine in a correct and safe manner, adhering to safe work practices.</li><li>Ensure the machine operation is correct by recognizing, intervening, and troubleshooting abnormal functions,&nbsp;parts out of specification, inserts requiring replacing.</li><li>Measuring in-process and finished parts for correct dimensions:<ul><li>&nbsp;Follow process for abnormal or out of specification parts.</li><li>Deburring and making all finished pieces safe for handling.</li><li>Correctly marking, loading finished parts prior to next production stage(s).</li><li>Maintain their area in an orderly fashion to the facility standards.</li></ul></li></ul>Required Abilities, Knowledge, Experience &nbsp;<ul><li>Able to safety operate a CNC lathe and/or CNC mill:<ul><li>&nbsp;Perform a pre-use inspection</li><li>&nbsp;Understand and navigate machine controls</li><li>&nbsp;Performing tool wear offset adjustments</li><li>&nbsp;Change inserts</li><li>&nbsp;Perform an emergency stop.</li></ul></li><li>Read and understand blueprints and technical drawings.</li><li>Use precision measuring tools effectively.</li><li>Read and understanding the traveler document.</li><li>Able to use hand, power, and pneumatic tools safely.</li><li>Capable of moving heavy equipment, materials, and supplies up to 23 kg (50lbs).</li></ul>All applicants are thanked for their interest.Steelhaus Technologies Inc. is an equal opportunity employer.&nbsp;Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

About the RoleThe Filament Winding Technician will be responsible for the setup and operation of the Filament Winding machines within our Composites facility. You will work with other machine operators to ensure that our products meet the required specifications, while maintaining quality standards and production goals.Position DetailsStatus: 3-month ContractLocation:&nbsp;Calgary, AB (NE Area)Duties and Responsibilities<ul><li>Protect the health and safety of workers and promote safe work.</li><li>Supervise workers in a healthy and safe manner and follow OHS legislation.</li><li>Ensure workers are not subject to or participate in harassment and violence.</li><li>Advising workers of all known or reasonably foreseeable work hazards, including controls to protect.</li><li>Ensure hazard controls are being followed and are correctly being used by workers.</li><li>Reporting health and safety concerns and conditions to their employer.</li><li>Cooperate with any person exercising a duty under the OHS legislation.</li><li>Preparing molds and/or mandrels for the winding process.</li><li>Ensure that the correct winding program has been selected.</li><li>Proper preparation of resin mixture.</li><li>Following established operating procedures for Filament Winding machines<ul><li>Monitor and adjust machines, as required</li><li>Ensure application of fibers and resin meets guidelines.</li></ul></li><li>Inspecting finished products to maintain quality standards.</li></ul>Required Abilities, Knowledge, Experience<ul><li>High school diploma or equivalent.</li><li>Experience with Filament machines or Composite manufacturing is preferred.</li><li>Able to read technical drawings and specifications.</li><li>Strong attention to detail.</li><li>Able to stand for long periods of time.</li><li>Able to move equipment, materials and supplies up to 23 kg (50 lbs.).</li><li>Able to communicate effectively with different levels of the business.</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

Filament Winding Technician

About UsSteelhaus Technologies Inc. became one of the fastest growing completions company since its establishment in 2008. Steelhaus boldly drives the market with innovative energy solutions; fusing practical, field-proven experience, adaptable engineering, integrated manufacturing, and uncompromising safety with relentless delivery of unwavering customer service.Through continuous growth and a collective of “Can Do” attitudes, we’ve created an environment that allows our people to thrive, to learn, to develop and move forward. &nbsp;About the RoleThe Tool Technician will work closely with other Tool Technicians in the assembly and testing of Steelhaus products by utilizing various hand tools and assembly processes. The Tool Technician will support Shipping/Receiving and Quality department. &nbsp;Position Details<ul><li>Status: 3-month contract</li><li>Available Shifts:&nbsp;<ul><li>Day (Mon-Fri, 8:00 AM - 4:00 PM)</li><li>Weekend (Fri-Sun, 6:00 AM - 6:00 PM) &nbsp;</li></ul></li><li>Location: Calgary, AB (NE Area) &nbsp;</li></ul>Duties and ResponsibilitiesGeneral Labor<ul><li>Performing routine housekeeping around the Shop</li><li>Manual &amp; Mechanical Lifting &amp; Moving Equipment, Materials and Supplies</li><li>Prepping Equipment Prior to Testing</li><li>Conducting Pre-Use Inspections of Mobile Equipment</li><li>Operating Pallet Jack</li></ul>Assembly<ul><li>Preparing tools for building</li><li>Building basic tools</li><li>Use of Hand Tools</li></ul>Shipping &amp; Receiving<ul><li>Manual &amp; Mechanical Loading tools into Crates or pallets for Shipments</li></ul>Knowledge, Skills, and Abilities<ul><li>Basic computer skills (MS office)</li><li>Skilled in the use of various hand tools</li><li>Ability to communicate with well with others</li></ul>All applicants are thanked for their interest.Steelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

10 Contract Jobs in Calgary, AB, Canada