field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work.Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation, proper configuration of downhole tools for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul> &nbsp;Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 5 years of direct industry experience &nbsp;</li><li>Industry related experience; coiled tubing, fracturing, drilling/service, or downhole tool operations&nbsp;</li><li>Proficient with Microsoft Office Suites&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement RequirementsDue to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor (Contractor)

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work. This position is liner hanger specific.&nbsp;Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation, proper configuration of downhole tools for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul>Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 8-12 years of experience on drilling rig and or tool experience; required&nbsp;</li><li>Industry related experience including; running Liner Hangers, Permanent Packers, Airlocks or Floatation collars, Toe Ports, Ball Drop systems and Sleeve systems in an Open Hole or Cemented Applications&nbsp;</li><li>Proficient with Microsoft Office Suites; Excel with experience building tallies&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement Requirements:&nbsp;Due to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor - Wellbore Construction (Contractor)

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work.Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation and proper configuration of downhole fracturing and completion tools and systems for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul>Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 5 years of direct industry experience &nbsp;</li><li>Industry related experience; coiled tubing, fracturing, drilling/service, or downhole tool operations&nbsp;</li><li>Proficient with Microsoft Office Suites&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement RequirementsDue to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor, Frac Services (Contractor)

Welcome to the intersection of energy and home services. At NRG, we’re all about propelling the next generation of leaders forward. We are driven by our passion to create a smarter, cleaner and more connected future. We deliver innovative solutions that make our customers’ lives easier—helping them power, protect, and intelligently manage their homes and businesses. To do this, we need creative and talented people to join our company.We offer a dynamic work environment and a unified and inclusive culture. NRG fosters a strong sense of belonging that leads to better collaboration and business performance. Our company programs are designed to help employees develop the skills they need for success now and in the future. In everything we do, we aim to champion our employees and bring value to our customers, investors and society.More information is available at <a href="http://www.nrg.com" target="_blank">www.nrg.com</a>. Connect with NRG on Facebook, LinkedIn, and follow us on Twitter @nrgenergy.Job Summary:The Senior Brand Marketing Manager, Contractor role located in Calgary, is an exciting position in Direct Energy Canada’s dynamic team. As one of the top electricity and natural gas companies, we play an important role in helping Albertans manage their energy needs.The Senior Brand Marketing Manager will partner closely with the Director of Marketing to build out Direct Energy’s brand value proposition, as well as drive the full funnel marketing and acquisition strategy across all channels.The successful candidate will lead a high-performing team and collaborate cross-functionally with creative, go-to-market (GTM), content, digital, product, and external agency teams to ensure brand alignment across all touchpoints. They will also oversee sponsorships and partnerships, playing an active role in relationship management and activation planning for top-tier investments and community partnerships.We’re seeking a senior marketer who is passionate about branding and understands its role in driving growth and customer acquisition for a year-long contractor role. This role partners closely with GTM leaders to stay informed on pricing, competitive dynamics, and product launches, translating insights into compelling brand campaigns that convert. As the lead on various initiatives, the candidate will guide a team across broad marketing activities including brand strategy, lead generation and SEM, retail sales support, sponsorships, community engagement, and customer experience.Key Responsibilities:<ul><li>Continue to evolve and enhance Direct Energy’s brand vision, promise, and platform to reflect customer needs and market dynamics.</li><li>Lead a team of four, providing day-to-day guidance and personal development planning and coaching</li><li>Own full-funnel campaign strategy and portfolio health across TOFU, MOFU, and BOFU stages.</li><li>Oversee creative development and execution with internal and external partners, including testing and optimization.</li><li>Manage marketing budget across all channels, including paid and digital, ensuring strong stewardship over all financial decisions.</li><li>Ensure consistent brand messaging and visual identity across all customer and prospect touchpoints.</li><li>Partner with GTM and product teams to support launches with data-driven acquisition strategies.</li><li>Monitor competitive landscape, pricing trends, and regulatory shifts to inform marketing plans.</li><li>Support call centre and retail teams with training and materials aligned to brand messaging.</li><li>Lead sponsorship and community partnership strategy, including donations and local engagement and volunteer opportunities.</li><li>Contribute to owned channels including website, social media, and outbound messaging.</li><li>Track brand health metrics and develop marketing ROI and attribution models, as well as creative testing and adapting marketing approaches based on research.</li><li>Actively listen to market and customer feedback, bringing insights to cross-functional teams.</li><li>Ensure all initiatives are well communicated internally across various teams with full transparency, to grow excitement and engagement across all Direct Energy teams.</li></ul>Minimum Requirements:<ul><li>Bachelor’s degree in marketing, business, commerce, communications or public relations from an accredited college or university</li><li>8-10+ years of experience in marketing, advertising, account planning, brand management or related communications field</li><li>Minimum 5 years leading a multi-disciplinary marketing professionals and coaching to success</li><li>Significant experience with the following marketing channels: mass media, paid and organic social, paid search, email, direct mail, sponsorships and community events</li><li>Familiarity with key metrics for each channel, tracking and analyzing KPIs e.g. MROI and search metrics.</li><li>Comfortable with test-and-learn, adaptive approach to marketing</li><li>Superior writing and communication skills</li></ul>Preferred Qualifications:<ul><li>Experience working in or managing in a marketing agency or corporate marketing department</li><li>Experience bringing a new product or service to market</li><li>Ability to handle ambiguity and comfort in defining appropriate direction for role and product offering</li><li>Experience with using data and insights to target customers and personalize messages</li><li>Experience with GTM approach for rolling out a new product / new program and/or experience in startup environment</li><li>Experience managing and leading marketing strategy for a product or service, including directing others, coordinating with multiple stakeholders including external agency partners</li><li>Experience with Agile ways of working (iterative, fast-paced, MVP-driven approach, ceremonies)</li><li>Strong negotiation skills</li></ul>Additional Knowledge, Skills and Abilities:<ul><li>Ability to interact and coordinate across an organization, including with leaders</li><li>Ability to present to management and executive teams</li><li>Laser focused on the customer, driving for the best outcomes that solve both customer and business needs</li><li>Strong collaborator and communicator, excellent listening, leadership and organizational skills</li><li>Ability to multitask and work successfully in a matrix organization with competing priorities</li><li>Strong PowerPoint skills for building marketing plans and reporting on results</li><li>Knows how to have fun, when to be serious, and how to celebrate success</li></ul>** This position is a One Year Contractor role to be paid hourly and not eligible for NRG/Direct Energy employee benefits.&nbsp;&nbsp;NRG Energy is committed to providing broad access to employment opportunities for diverse job seekers, and to ensuring our workforce represents the diverse communities we serve. We abide by human rights legislation and accommodate applicants and employees in accordance with applicable law.Any information you provide through this form will be used and disclosed for the purposes of considering your application and, if you are offered a job, in relation to your employment (including post-employment activities). If you have provided references, you consent to us contacting such references and obtaining your personal information from them. Do not submit references if you have not obtained the consent of such references. Your personal information will otherwise be handled in accordance with our privacy policy.DEML employs individuals in the Provinces of Alberta, Ontario, British Columbia, and Saskatchewan. We regret that we will be unable to hire you for this role if your regular remote work location is not within one of these listed provinces. Please reach out to <a href="mailto:careers@nrg.com" target="_blank">careers@nrg.com</a> if you have any questions.

Senior Brand Marketing Manager - Contractor Role

<h3>Job Summary:</h3>Highly motivated and detail-oriented Drilling Technologist with a strong technical foundation in wellbore construction, including wellhead configuration, casing tallies, cementing reporting, drilling bit records &amp; BHAs summary, drilling time log, directional survey reporting &amp; field data analysis. Proficient in industry standard software such as WellView (including initiating and managing new wells), Petro Sight, and skilled in database management for accurate and timely reporting. Adept at supporting the drilling operations team with precise documentation, schematics, and drilling data to drive safe, efficient and cost-effective drilling operations. Assist in management of drilling material inventory, HWDP usage tracking and other company-owned drilling equipment.<h3>Responsibility:</h3>l&nbsp; Support the Drilling Operations Team in accurately completing daily Wellview and Petrosight reports, ensuring consistency, completeness, and compliance with company standards.l&nbsp; Perform quality control (QC) and quality assurance (QA) on WellView and Petrosight entries, validating drilling data integrity and correcting discrepancies in real-time.l&nbsp; Conduct drilling data analysis using WellView and other sources to identify operational trends, inefficiencies, and optimization opportunities.l&nbsp; Manage and track drilling material inventory, including casing, drill pipe, mud products, and other consumables, to support efficient supply chain coordination.l&nbsp; Make drilling projection based on a schedule; assist finance in planning/tracking drilling revenue and cost.l&nbsp; Monitor and document heavy weight drill pipe (HWDP) usage, ensuring proper placement, COSL owned 5” HWDP DS-1 Category 5 inspection tracking &amp; cost allocation.l&nbsp; Support drilling cost analysis, providing input into cost tracking systems, variance reporting, and performance benchmarking.l&nbsp; Assist in initiating and maintaining new wells in WellView from spud to TD, including detailed well schematics, casing tallies, timelog accuracy, BHA assemblies, wellhead configurations, directional survey reporting, cementing records…etc.l&nbsp; Contribute to post-well reporting and lessons-learned documentation, ensuring data is captured for continuous improvement initiatives.l&nbsp; Assist wellsite supervisors and safety personnel on site with invoice/ticket approvals, scheduling, administration, material and logistical responsibilities.l&nbsp; Provide ongoing support and training to the drilling operations team and engineering team on how to capture data in WellView and how to utilize the reports for evaluation.l&nbsp; Create SAGD WellView training manual for field supervisors. &nbsp;<h3>Experience &amp; Skills:</h3>l&nbsp; 15 years of industry experience is preferred.l&nbsp; College diploma in engineering, data analysis or a related field.l&nbsp; Experience in SAGD or Thermal Drilling operations is required, additional experience in AER regulations and environmental is preferredl&nbsp; High degree of initiative and independent judgmentl&nbsp; Strong attention to detail; ability to perform duties with a high level of accuracyl&nbsp; Ability to organize work, engage in a variety of tasks simultaneously, and consistently meet deadlinesl&nbsp; Good computer skills including word processing, spreadsheets, drilling data information systems-l&nbsp;Wellview and Petrosight.l&nbsp; Ability to work well and communicate effectively within a multi-functional, integrated teaml&nbsp; Strong oral and written communication skillsl&nbsp; Well-developed communication, interpersonal, and team focused skills.<h3>Working Conditions:</h3><h3>Required Tickets:</h3>l&nbsp; WCBl&nbsp; College Diploma

Position: Drilling Technician

Steelhaus Technologies is seeking an Electrical Engineer (Contractor) to support an ongoing project on a contract basis. This role is expected to require approximately&nbsp;800 hours of work over the duration of the contract. The successful candidate will apply their technical expertise in electrical engineering to deliver high-quality solutions, collaborate with internal teams, and ensure project milestones are met.Key Responsibilities<ul><li>Design, develop, and optimize electronic circuits and hardware systems for various applications</li><li>Collaborate with software and firmware teams to integrate hardware and software seamlessly</li><li>Conduct feasibility studies and evaluate component and system-level performance to meet design specifications</li><li>Lead the prototyping, testing, and validation of electronic systems, ensuring compliance with industry standards and regulations</li><li>Troubleshoot and resolve technical challenges during the design and development process</li><li>Conduct risk assessments and implement mitigation strategies to ensure project success</li><li>Document designs, processes, and test results to facilitate knowledge sharing and product certification</li></ul>Qualifications<ul><li>Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering, or a related field</li><li>3+ years of experience designing and developing electronic devices and systems</li><li>Strong knowledge of analog and digital circuit design, including PCB layout and simulation tools (e.g., Altium, Eagle, SPICE)</li><li>Proficiency in using electronic test equipment such as oscilloscopes, signal generators, and spectrum analyzers</li><li>Experience in embedded systems design and programming (e.g., C/C++, Python) is a plus</li><li>Familiarity with regulatory and certification requirements for electronic devices (e.g., FCC, CE, ISO)</li><li>Excellent problem-solving skills and the ability to work independently or within a team</li><li>Strong communication skills to articulate technical concepts to stakeholders</li></ul>Benefits &amp; Perks of Working With Us<ul><li>Opportunity to work on cutting-edge technologies with real-word impact</li><li>Full comprehensive benefits package including extended health and dental care and wellness and health spending accounts</li><li>Company contribution to your Retirement Savings Plan (RSP)&nbsp;</li><li>Collaborative and innovative work environment</li><li>Professional development opportunities to grow your career</li></ul>All applicants are thanked for their interest.Steelhaus Technologies Inc. is an equal opportunity employer.&nbsp;Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

Electrical Engineer

About the RoleWe are seeking out a General Operator to join our Pangea Screen team. The successful candidate will be responsible for supporting the Direct Wire Wrap operations, while also supporting various aspects around the manufacturing shop including deburr, punch slot, shroud weld, shroud installation, end ring operations.Position Details:<ul><li>Contract: 3-month</li><li>Shift: Day, Graveyard, Weekend</li><li>Location: Calgary, AB (NE Area)&nbsp;</li></ul>Duties and Responsibilities &nbsp;Direct Wire Wrap &nbsp;Health and Safety**The equipment used in this process may interfere with electronic medical implants, DO NOT APPLY if you have an electronic medical implant**<ul><li>Securing pipes on Direct Wire Wrap machine, selecting the correct gauge and shape, and ensuring wire cuts are accurate.</li><li>Selecting correct Wrap Program on the machine according to the customer order, conduct wrap process, and monitor the wrap coil and sizing.</li><li>Monitoring the entire wrap process from start to end to ensure wrap coil does not twist or move out of correct spacing.</li><li>Conduct Gap Checks at each regular interval to ensure they are conforming and accurate.</li><li>Perform in-process inspection of machined components with company provided Quality Control measuring equipment.</li><li>Utilize Lucid system to track quality data on current products.</li></ul>Deburr<ul><li>Conduct accurate measurements, confirm inside and outside dimensions and ensure raw material matches within the Lucid system.</li><li>Charge out deburr head and operate the deburr machine.</li><li>Inspect the ID of pipe to confirm the deburr head is performing its function.</li><li>Remove any broken of drill heads from pipe and ensuring the pipe is free of deburr. &nbsp;</li></ul>Shroud Weld<ul><li>Monitor the shroud welding machine.</li><li>Perform and ensure each shroud passes in process quality inspection.</li><li>Adjust when required to keep product in tolerance.</li><li>Log all data in the lucid quality system.</li><li>Confirm each shroud is marked for traceability purposes.</li></ul>Shroud Installation<ul><li>Position shroud and pipe on the shroud pull conveyor system.</li><li>Pull shroud onto pipe using the hydraulic drive.</li><li>Confirm the shroud and pipe have been fitted with end rings and the shroud crimped with shroud crimper in proper location.</li></ul>End Ring Weld<ul><li>Ensure proper end rings are on the pipe and in position.</li><li>Follow the Pre, Post and Weld procedures that have been created.</li><li>Conducting checks to guarantee assigned equipment is operating correctly and in good working order.</li></ul>Other Duties<ul><li>Ensuring all data is accurately entered into the Lucid system, logging data to confirm the procedure has been completed and achieved its results.</li><li>Conducting checks to guarantee assigned equipment is operating correctly and in good working order.</li><li>Liaise with the Quality Control Team, Shipping/Receiving, and other employees, and supervisors.</li><li>Maintaining the assigned work area clean and free from hazards.</li><li>Adhering to health and safety protocols including always wearing proper Personal Protective Equipment (PPE).</li></ul>&nbsp;Required Abilities, Knowledge, Experience<ul><li>Basic computer skills and ability to navigate through Lucid System.</li><li>Demonstrated ability to work to exact drawing and order specifications an asset.</li><li>Ability to read and follow instruction from order on Lucid System.</li><li>Team player with strong verbal and written communication skills.</li><li>Demonstrates strong attention to detail in order to create highest quality level products.</li><li>Experience using various hand tools and equipment including forklift and hand cutting tools for steel plates an asset.</li><li>Knowledge or experience utilizing Quality Control equipment including casing drift, calipers, feeler gauge/microscope, and shroud bend test machine an asset.</li><li>Experience using measuring equipment an asset.</li><li>Possesses effective time management skills and efficiency.</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

General Operator (DWW)

Job SummaryThe Quality Control Inspector will be performing first-off, in-process, and final inspections of Steelhaus products. The Quality Control Inspector will coordinate with other departments including assembly, manufacturing and shipping/receiving. &nbsp;Position DetailsStatus: 3-month contractLocation: Calgary, NEDuties and Responsibilities<ul><li>Protecting their own and others’ health and safety at or in the vicinity of the work site.</li><li>Cooperating with their employer or supervisor by following health and safety rules for the job.</li><li>Using all hazard controls and wearing personal protection equipment designated or provided by the employer or required by the OHS legislation.</li><li>Refraining from causing or participating in harassment and violence.</li><li>Reporting health and safety concerns and conditions to their employer or supervisor.</li><li>Participating in any training provided by the employer.</li><li>Cooperating with any person exercising a duty under the OHS legislation.</li><li>Communication with their colleagues, supervisors, and managers.</li><li>Prepping equipment prior to inspection.</li><li>Verifying dimensions of parts machined using micrometers, calipers, other precision measuring instruments.</li><li>Perform first article inspections on all product runs.</li><li>Perform final quality inspection and dimensional inspection, verification of marking of manufactured parts and components.</li><li>Verify MTR heat numbers as defined on manufacturing travelers.</li><li>Initiate Nonconformance reports (NCRs) for all parts that do not meet requirements.</li><li>Identify and segregate NCR parts.</li><li>Assist in the maintenance of the NCR Area as required, and ensure parts are identified.</li><li>Identify tools requiring calibration and perform calibration of measurement tools.</li><li>Maintain emails, perform photocopying and printing.</li><li>Responsible to identify needs for consumables.</li></ul>Required Abilities, Knowledge, Experience<ul><li>Demonstrate understanding of parts drawings and GD&amp;T.</li><li>2+ Years in a similar role.</li><li>2+ Years experience in a machining or assembly shop environment.</li><li>Demonstrate experience using a variety of hand inspection tools.</li><li>Experience with specialized measuring instruments preferred, such as:<ul><li>Surface Finish Gauge,</li><li>Wall Thickness Gauge.</li></ul></li><li>CMM is preferred.</li><li>Able to demonstrate basic computer skills (MS Office).</li></ul>All applicants are thanked for their interest &nbsp;Steelhaus Technologies Inc. is an equal opportunity employer. &nbsp; Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

Quality Control Inspector

About&nbsp;UsSteelhaus Technologies Inc. became one of the fastest growing completions company since its establishment in 2008. Steelhaus boldly drives the market with innovative energy solutions; fusing practical, field-proven experience, adaptable engineering, integrated manufacturing, and uncompromising safety with relentless delivery of unwavering customer service. &nbsp;Through continuous growth and a collective of “Can Do” attitudes, we’ve created an environment that allows our people to thrive, to learn, to develop and move forward. &nbsp;About the RoleThe CNC Technician Level 1 will be responsible for loading programs into the CNC machine, operating a CNC Lathe and Mill, maintaining Quality and Safety Standards, keeping records, and maintaining equipment and supplies.Position Details<ul><li>Status: 3-month Contract</li><li>Available Shifts:<ul><li>Day (Mon-Thurs, 6:00 AM - 4:00 PM)</li><li>Afternoon (Mon-Thurs, 4:00 PM - 2:00 AM)</li><li>Weekend (Fri-Sun, 6:00 AM - 6:00 PM)</li></ul></li><li>Location: Calgary, AB (NE Area)</li></ul>Duties and Responsibilities<ul><li>Operation of CNC Lathe/Mill, navigation of machine control and preforming tool wear offset adjustments</li><li>Reading and understanding the traveler document</li><li>Loading the material into the CNC machine in a correct and safe manner.</li><li>Managing the raw materials basket by making accurate measurements to verify the correct material size</li><li>Performing machine inspection and basic maintenance tasks to ensure proper functioning of a CNC machine</li><li>Recognizing broken tooling and inserts during operation.</li><li>Utilization of tools and equipment including measuring tools, hand tools, power &amp; pneumatic tools, and operating a pallet jack</li><li>Locating and identifying the correct inserts</li><li>Replacing inserts and tools using the proper technique</li><li>Maintaining chip conveyors by identifying chip blockages and safely removing any that should incur</li><li>Identified burrs on part and safely removing them</li><li>Finishing work pieces and performing quality control checks through reading technical drawings and blueprints and using key measuring tools</li><li>Measuring in-process and final part against drawing</li><li>Correctly handling finished materials</li><li>Performing routine housekeeping around the shop</li><li>Adhering to health and safety protocols including always wearing proper Personal Protective Equipment (PPE) and personally acquiring them from available sources (i.e., vending machine)</li><li>Occasional photocopying, printing, and other job duties assigned as required</li></ul>Knowledge, Skills, and Abilities<ul><li>Working knowledge and previous experience with operating a CNC Lathe and Mill&nbsp;</li><li>Possess mechanical and technical skills to effectively operate and troubleshoot a CNC machine independently</li><li>Ability to read technical drawings and printings and utilize key measuring tools</li><li>Experience with utilizing various hand tools and understanding machine utilization capacity and tooling capabilities</li><li>Ability to navigate the control panel&nbsp;</li><li>Strong communication skills to effectively interact with employees and supervisors</li><li>Ability to work both independently and as a part of a team</li><li>Capable of moving heavy equipment, materials, and supplies up to 23 kg (50lbs)</li><li>Previous knowledge or experience of oil and gas specific threads is an asset</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

CNC Technician

About&nbsp;UsSteelhaus Technologies Inc. became one of the fastest growing completions company since its establishment in 2008. Steelhaus boldly drives the market with innovative energy solutions; fusing practical, field-proven experience, adaptable engineering, integrated manufacturing, and uncompromising safety with relentless delivery of unwavering customer service. &nbsp;Through continuous growth and a collective of “Can Do” attitudes, we’ve created an environment that allows our people to thrive, to learn, to develop and move forward.About the Role &nbsp;We are seeking an enthusiastic Shop Hand to join our team! This position will be responsible for identifying moving parts within the shop to ensure efficient production flow and support for assembly technicians. This role involves monitoring inventory levels and reporting on materials. The Shop Hand will assist in the assembly of tools while ensuring compliance with quality control standards.&nbsp;Position Details<ul><li>Position Status: Full-Time, Contract (3-months)</li><li>Location: Calgary, AB</li><li>Shift: Weekdays (Monday to Friday, 7:00 am to 3:00 pm)</li></ul> &nbsp;Duties and Responsibilities &nbsp;<ul><li>Identifying parts to be put into production line. &nbsp;</li><li>Ensuring work packages are attached to the correct basket. &nbsp;</li><li>Loading rollers with baskets including putting a tray on the rollers. &nbsp;</li><li>Receiving, picking, and sorting office supplies, parts, tools, and magnesium stock. &nbsp;</li><li>Conducting Pre-Use Inspections of mobile equipment. &nbsp;</li><li>Operating equipment including hand tools, pallet jack, and forklift, crane. &nbsp;</li><li>Assist in the assembly of tools, focusing on O-rings, seals, set screws, and sleeves. &nbsp;</li><li>Ensure compliance with quality control standards in preparing tools for assembly, testing, and shipping.</li><li>Manual and mechanical lifting/moving equipment, materials, and supplies which can include setting up and operating. &nbsp;</li><li>Performing routine housekeeping around the shop. &nbsp;</li><li>Occasional photocopying, printing, and other job duties assigned as required. &nbsp;</li><li>Cooperating with their employer or supervisor by following health and safety rules for the job. &nbsp;</li><li>Participating in any training provided by the employer. &nbsp;</li><li>Using all hazard controls and wearing personal protection equipment&nbsp;designated&nbsp;or provided by the employer or required by the OHS legislation. &nbsp;</li><li>Cooperating with any person exercising a duty under the OHS legislation. &nbsp;</li></ul> &nbsp;Knowledge, Skills, and Abilities<ul><li>Shipping and receiving experience. &nbsp;</li><li>Basic computer skills and ability to navigate through shipping app and SharePoint. &nbsp;</li><li>Experience with utilizing various hand tools. &nbsp;</li><li>Capable of moving heavy equipment, materials, and supplies up to 23 kg (50 lbs). &nbsp;</li><li>Ability to work both independently and as a part of a team. &nbsp;</li><li>Ability to communicate effectively with co-workers. &nbsp;</li></ul> All applicants are thanked for their interest.Steelhaus Technologies Inc. is an equal opportunity employer.&nbsp;Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.&nbsp;

16 Contract Jobs in Canada