field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Apex Oilfield Services (2000) Inc

Solids Control Technician 

Wellsite Technician

Overview:Advanced Upstream (AU) is an innovative, fast-paced company, providing engineering and production of completion equipment and testing services to oil and gas companies. In a short period of time, AU has created a series of essential, efficient and innovative downhole solutions to provide its customers with confidence in their operations. The products that AU creates assist its customers in enhancing their energy production while reducing the environmental impact. Advanced Upstream is looking to add a Field Service Technician to their team.Job Summary:The&nbsp;Field Service Technician’s primary responsibilities&nbsp;will be the installation of Advanced Upstream (AU) bottom hole assemblies and completion equipment at customer job sites in any area that AU performs work. The Field Service Technician will account for, caliper, and measure all equipment against job packets, well data and tallies, while organizing paperwork and helping customers with equipment placement and tracking. Additionally, the technician will be required to perform hydraulic calculations including displacements, capacities, buoyancies, and pressures, and record the results on schematics and reports.Key areas of responsibility:<ul><li>Install Advanced Upstream completion tools equipment according to operating procedures or within the scope of project application</li><li>Verify and inspect that completion equipment and supplies shipped to the well site are in proper working condition</li><li>Perform downhole hydraulic calculations</li><li>Report status of on-going activities daily to the reporting manager</li><li>Prepare, complete, and submit accurate and thorough end of well reports on a timely basis to the reporting manager</li><li>Prepare JSA (Job Safety Analysis) for wellsite operations and report all non-conformance in a timely manner</li><li>Attend pre-job meetings, toolbox talks with relevant on-location personnel</li><li>Convey information and job details to co-workers at the end of each shift to ensure an efficient shift change over</li><li>Adherence to all AU policies and procedures (vehicle, safety, correspondence, housekeeping)</li><li>Participate and uphold all HSE policies and procedures of AU and as well as any specific customer requirements</li><li>Assist in the implementation of corrective/preventive actions</li><li>Report all non-conformance actions and situations in a timely manner</li><li>Required to be available on a 24-hour call basis as needed</li><li>Provide workshop assistance when not at field locations</li><li>Frequent travel is required;</li><li>Other duties as assigned.</li></ul>Qualification Requirements:<ul><li>High School Diploma or equivalent</li><li>6 months to one year oilfield experience preferred</li></ul>Technical Requirements:<ul><li>H2S, Standard First Aid, WHIMIS</li><li>Valid Class 5 Drivers License with a good record (abstract to be provided)</li></ul>Required skills and abilities:<ul><li>Ability to perform advanced mathematical calculations as it applies to customer requirements</li><li>Good oral and written communication skills</li><li>Strong problem-solving skills with the ability to think creatively to solve unique problems</li><li>Proficient with Microsoft Office Suites</li><li>Work with other team members and organizational groups and exhibit effective communication</li><li>Self-motivated with excellent organizational and time management skills</li><li>Excellent judgement, high level of commitment &amp; strong work ethic</li><li>Ability to handle multiple priorities simultaneously, manage priorities and execute tasks efficiently</li><li>Ability to handle stressful and high pace situations</li><li>Ability to perform job responsibilities in all weather conditions</li><li>Perform physical labor when necessary, in addition to standing or travelling for long periods of time</li><li>Ability to move or lift 25lbs – 50lbs</li></ul>This job description is subject to change without notice. This description is intended to explain the general nature and level of work being performed by employees assigned to this position. It is not intended to be an entire list of all activities, tasks, and skills required, for people in this position.

FIELD SERVICE TECHNICIAN

AMGAS Services US Inc. is a leading emission solution provider to the Oil and Gas Industry. For over 33 years, AMGAS has led the industry in H2S and noxious emission control, supplying a complete line of scrubbers and chemicals.We are currently seeking a Full-Time Field Technician/Operator to join our team in Midland, Texas (Big Springs area). The successful candidate will play a crucial role in chemical testing, equipment maintenance, and ensuring operational efficiency in the field.Qualifications and Skills:<ul><li>Previous experience in the oilfield is preferred.</li><li>Valid Class 5 Driver’s License with a clean driving record. Class 1 License is an asset.</li><li>Current field tickets including H2S Alive, Standard First Aid, CSTS or PST, and HAZMAT.</li><li>Valid Passport.</li><li>High School Diploma.</li><li>Ability to lift up to 50lbs and maintain physical fitness.</li></ul>Responsibilities:<ul><li>Conduct chemical testing as per standard procedures.</li><li>Perform maintenance on H2S scrubbers and pumps to ensure optimal performance.</li><li>Supervise the loading and offloading of chemical trucks</li><li>Prepare and submit daily reports documenting activities and findings.</li><li>Working on a rotation of two weeks on, one week off</li></ul>This is a full-time position consisting of 12-hour shifts and weekend availability. All interested applicants are encouraged to apply, but only selected individuals will be contacted for interviews.Join us at AMGAS Services US Inc. and be part of a dynamic team dedicated to providing innovative emission solutions to the Oil and Gas industry.

AMGAS Services Inc

Field Technician

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work. This position is liner hanger specific.&nbsp;Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation, proper configuration of downhole tools for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul>Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 8-12 years of experience on drilling rig and or tool experience; required&nbsp;</li><li>Industry related experience including; running Liner Hangers, Permanent Packers, Airlocks or Floatation collars, Toe Ports, Ball Drop systems and Sleeve systems in an Open Hole or Cemented Applications&nbsp;</li><li>Proficient with Microsoft Office Suites; Excel with experience building tallies&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement Requirements:&nbsp;Due to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor - Wellbore Construction (Contractor)

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work.Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation, proper configuration of downhole tools for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul> &nbsp;Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 5 years of direct industry experience &nbsp;</li><li>Industry related experience; coiled tubing, fracturing, drilling/service, or downhole tool operations&nbsp;</li><li>Proficient with Microsoft Office Suites&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement RequirementsDue to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor (Contractor)

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work.Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation and proper configuration of downhole fracturing and completion tools and systems for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul>Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 5 years of direct industry experience &nbsp;</li><li>Industry related experience; coiled tubing, fracturing, drilling/service, or downhole tool operations&nbsp;</li><li>Proficient with Microsoft Office Suites&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement RequirementsDue to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor, Frac Services (Contractor)

Great North Wellhead &amp; Frac (An Innovex Company) is actively searching for Field Service Technicians, I/II/III - Frac Projects for our MWFC Division (Multi-well Plug and Perf and Frac Missile) in Clairmont or Red Deer.Schedule: 15 days on/6 days off (14 Hour days)Location: ClairmontWage: $28-$40, based off experienceType: Full TimeWhat we offer:<ul><li>Dental care</li><li>Extended health care</li><li>RRSP match</li><li>Life &amp; Disability Insurance</li></ul>Job Responsibilities:<ul><li>Installation, operation, removal, and repair of multi-well fracturing systems, hydraulics systems, grease delivery systems, and wellhead components.</li><li>Perform Valve Repair and scheduled maintenance</li><li>Repair, assemble, test, maintain tools, and customer equipment</li><li>Maintain all Great North Wellhead &amp; Frac property, including truck, service tools, phone, computers, etc. in a clean and organized state.</li><li>Prepare detailed Job Safety Analysis (JHA's)</li><li>Comply with all Company Health, Safety, &amp; Quality Policies</li><li>Perform other related duties as assigned by management or indicated by responsibilities.</li></ul>Job Requirements:<ul><li>Wellhead/Frac Experience 1-4 years required</li><li>Gate Valve knowledge / repair experience considered and asset</li><li>Valid class 5 license and ability to be insured commercially</li><li>H2S, First Aid and CSO certifications are an asset</li><li>Fall Arrest and Aerial platform certifications an asset</li><li>Ability to work in a team environment as well as independently.</li><li>Strong work ethic, mechanical aptitude, and commitment to safety.</li><li>Service Oriented &amp; problem-solving skills</li><li>Must communicate effectively, both written and verbal.</li><li>Computer skills considered an asset; DISCORD, Excel</li><li>Willingness to travel and assist in other branch locations.</li><li>Must meet the physical demands and requirements of the job on a regular and consistent basis: This role involves regularly lifting 50lbs, bending, twisting, kneeling, squatting, walking and/or sitting for extended periods of time. In addition to the physical nature of this position, this role involves performing tasks in severe weather conditions as required.</li></ul>Job Type: Full-timePay: $28.00-$40.00 per hourAdditional pay:<ul><li>Bonus pay</li><li>Overtime pay</li></ul>Benefits:<ul><li>Dental care</li><li>Disability insurance</li><li>Extended health care</li><li>Life insurance</li><li>RRSP match</li></ul>Schedule:<ul><li>12 hour shift</li><li>Overtime</li></ul>Work Location: In person

8 Field Technician Jobs in Canada