field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

About the RoleThe CNC Technician Level 1 will be responsible for loading programs into the CNC machine, operating a CNC Lathe and Mill, maintaining Quality and Safety Standards, keeping records, and maintaining equipment and supplies.Position DetailsStatus:&nbsp;3-month ContractAvailable Shifts: Afternoon Shift (Mon-Fri, 2:00 PM - 10:00 PM); Graveyard (Mon-Fri, 10:00 PM - 6:00 AM)&nbsp;Location:&nbsp;Calgary, AB (NE Area)Duties and Responsibilities<ul><li>Operation of CNC Lathe/Mill, navigation of machine control and preforming tool wear offset adjustments</li><li>Reading and understanding the traveler document</li><li>Loading the material into the CNC machine in a correct and safe manner.</li><li>Managing the raw materials basket by making accurate measurements to verify the correct material size</li><li>Performing machine inspection and basic maintenance tasks to ensure proper functioning of a CNC machine</li><li>Recognizing broken tooling and inserts during operation.</li><li>Utilization of tools and equipment including measuring tools, hand tools, power &amp; pneumatic tools, and operating a pallet jack</li><li>Locating and identifying the correct inserts</li><li>Replacing inserts and tools using the proper technique</li><li>Maintaining chip conveyors by identifying chip blockages and safely removing any that should incur</li><li>Identified burrs on part and safely removing them</li><li>Finishing work pieces and performing quality control checks through reading technical drawings and blueprints and using key measuring tools</li><li>Measuring in-process and final part against drawing</li><li>Correctly handling finished materials</li><li>Performing routine housekeeping around the shop</li><li>Adhering to health and safety protocols including always wearing proper Personal Protective Equipment (PPE) and personally acquiring them from available sources (i.e., vending machine)</li><li>Occasional photocopying, printing, and other job duties assigned as required</li></ul>Knowledge Skills and Abilities<ul><li>Working knowledge and previous experience with operating a CNC Lathe and Mill</li><li>Possess mechanical and technical skills to effectively operate and troubleshoot a CNC machine independently</li><li>Ability to read technical drawings and printings and utilize key measuring tools</li><li>Experience with utilizing various hand tools and understanding machine utilization capacity and tooling capabilities</li><li>Ability to navigate the control panel</li><li>Strong communication skills to effectively interact with employees and supervisors</li><li>Ability to work both independently and as a part of a team</li><li>Capable of moving heavy equipment, materials, and supplies up to 23 kg (50lbs)</li><li>Previous knowledge or experience of oil and gas specific threads is an asset</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

CNC Technician

About the RoleThe CNC Technician Level 1 will be responsible for loading programs into the CNC machine, operating a CNC Lathe and Mill, maintaining Quality and Safety Standards, keeping records, and maintaining equipment and supplies.Position DetailsStatus: 3-month ContractAvailable Shifts: Day Shift (Mon-Fri, 8:00 AM - 4:30 PM); Afternoon (Mon-Fri, 4:30 PM - 1:00 AM)&nbsp;Location: Calgary, AB (NE Area)Duties and Responsibilities<ul><li>Operation of CNC Lathe/Mill, navigation of machine control and preforming tool wear offset adjustments</li><li>Reading and understanding the traveler document</li><li>Loading the material into the CNC machine in a correct and safe manner.</li><li>Managing the raw materials basket by making accurate measurements to verify the correct material size</li><li>Performing machine inspection and basic maintenance tasks to ensure proper functioning of a CNC machine</li><li>Recognizing broken tooling and inserts during operation.</li><li>Utilization of tools and equipment including measuring tools, hand tools, power &amp; pneumatic tools, and operating a pallet jack</li><li>Locating and identifying the correct inserts</li><li>Replacing inserts and tools using the proper technique</li><li>Maintaining chip conveyors by identifying chip blockages and safely removing any that should incur</li><li>Identified burrs on part and safely removing them</li><li>Finishing work pieces and performing quality control checks through reading technical drawings and blueprints and using key measuring tools</li><li>Measuring in-process and final part against drawing</li><li>Correctly handling finished materials</li><li>Performing routine housekeeping around the shop</li><li>Adhering to health and safety protocols including always wearing proper Personal Protective Equipment (PPE) and personally acquiring them from available sources (i.e., vending machine)</li><li>Occasional photocopying, printing, and other job duties assigned as required</li></ul>Knowledge Skills and Abilities<ul><li>Working knowledge and previous experience with operating a CNC Lathe and Mill</li><li>Possess mechanical and technical skills to effectively operate and troubleshoot a CNC machine independently</li><li>Ability to read technical drawings and printings and utilize key measuring tools</li><li>Experience with utilizing various hand tools and understanding machine utilization capacity and tooling capabilities</li><li>Ability to navigate the control panel</li><li>Strong communication skills to effectively interact with employees and supervisors</li><li>Ability to work both independently and as a part of a team</li><li>Capable of moving heavy equipment, materials, and supplies up to 23 kg (50lbs)</li><li>Previous knowledge or experience of oil and gas specific threads is an asset</li></ul>All applicants are thanked for their interestSteelhaus Technologies Inc. is an equal opportunity employer. Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.

POSITION SUMMARYLaborers required to assist skilled trades people and perform labor activities at our Crossfield pipe fabrication shop.&nbsp;Employees are expected to support and participate in a “culture of safety” and adhere to and be ambassadors of Strike’s Code of Conduct and Values, and to treat others with dignity, respect, and fairness.POSITION DETAILS<ul><li>Based out of our Crossfield fabrication facility.</li><li>Shift is Monday to Friday</li><li>10-hour days</li></ul>CORE ACCOUNTABILITIES<ul><li>Identify and report hazards or unsafe work practices.</li><li>Assist with installation, testing and rigging of pipe spools and materials</li><li>Clean construction work areas and fuel equipment as needed.</li><li>Zoom boom and skid steer experience an asset</li><li>Perform other activities as directed</li><li>Participate in pre-job toolbox meetings to identify potential hazards and measures to eliminate or minimize them</li><li>Return tools back to the proper area after the job is complete or at the end of the shift</li><li>Ensure the appropriate use of Personal Protective Equipment while performing tasks&nbsp;</li></ul>QUALIFICATIONSEducation<ul><li>Equipment operating experience is an asset but is not required</li></ul>SKILLS, KNOWLEDGE, &amp; ABILITIES<ul><li>Must be able to pass pre-employment drug &amp; alcohol testing</li><li>Able to lift 50 pounds</li><li>Comfortable working outdoors</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike, we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at the Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike, we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety-focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law.Join our fast-growing company with a small business feel.

Strike Group

Strike Group Limited Partnership

Labourer

POSITION SUMMARYThe QA/QC Coordinator will be responsible for the execution of assigned QC activities on the project site.POSITION DETAILS&nbsp;&nbsp;<ul><li>This will be a position within our projects group based out of Airdrie</li><li>This will be a field-based position covering projects located primarily in Western Canada</li></ul>CORE ACCOUNTABILITIES&nbsp;<ul><li>Ensure the implementation of QC requirements at the job site</li><li>Perform pre-inspection to ensure that all installed materials are in conformance with the applicable standards, drawings and specifications;</li><li>Conduct interim and final inspections with owner’s representative per inspection and testing procedures (I&amp;TP.)</li><li>Create Hydrotest packages and witness all testing activities</li><li>Review Radiographic film</li><li>Continually monitor work in-progress to ensure compliance with QC and other project requirements</li><li>Act as an accessible resource on QC issues</li><li>Coordinate Quality team member activities in conjunction with construction activities; and</li><li>Prepare required documentation and maintain files for final turnover to the client</li></ul>QUALIFICATIONSEducation<ul><li>Level 1 or 2 CWB certification required&nbsp;</li><li>Relevant technical diploma and/or trade certificate</li></ul>Knowledge &amp; Skills<ul><li>Must have the ability to pass a Alcohol &amp; Drug test</li><li>Strong client relations skills</li><li>Exemplary professional verbal and written communication skills</li><li>Meticulous record-keeping skills</li><li>Excellent organizational and time management skills</li><li>Advanced computer skills – MS Office, Adobe Pro/Blue Beam, etc.</li><li>Capable of working independently with minimal direction</li></ul>Safety Tickets Required<ul><li>CSTS 2020 or Common Safety Orientation (CSO).&nbsp;</li><li>Bear or Wildlife Awareness course</li><li>Standard First Aid CPR-C &amp; AED (St. John Ambulance or Canadian Red Cross) or WorkSafe BC Occupational First Aid Level 1 (OFA 1) Training Certificate</li><li>WHIMIS 2015 (Strike can provide when onboarding)</li><li>Transportation of Dangerous Goods – TDG (Strike can provide when onboarding)</li><li>Fall Protection Training</li><li>Arial Work Platform Training</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.Join our fast-growing company with a small business feel.

QA/QC Coordinator

POSITION SUMMARYStrike is looking for Light Equipment Operator with relevant experience in oil &amp; gas construction/facility maintenance. Typical day to day work will be to load and unload material, move aggregate material, rig and transport material throughout site, work outside equipment as necessary supporting labour/trades crews.Employees are expected to support and participate in a “culture of safety” and adhere to and be ambassadors of Strike’s Code of Conduct and Values, and to treat others with dignity, respect and fairness.Note: This posting will be used to collect applications to fill current openings as well as anticipated future openings. Future openings are anticipated but not guaranteed.POSITION DETAILS<ul><li>Shop/Module Yard work</li><li>Hours are 7am - 5pm, 50 hours/week</li><li>Shop Location Crossfield, Alberta</li></ul>CORE ACCOUNTABILITIES<ul><li>Operate a telehandler/skidsteer to move and lift pipe spools, load trailers,&nbsp;and transport other&nbsp;miscellaneous material&nbsp;throughout the site</li><li>Assist other tradespeople with the completion of their duties when required</li><li>Conduct pre-operational checks on equipment and clean, lubricate and refill equipment</li><li>Identify and report hazards or unsafe work practices</li><li>Participate in pre-job toolbox meetings to identify potential hazards and measures to eliminate or minimize them</li><li>Perform other activities at construction sites, as directed</li></ul>QUALIFICATIONSEducation<ul><li>Must possess a valid, non-graduated driver's license</li></ul>SKILLS, KNOWLEDGE, &amp; ABILITIES<ul><li>Must be able to pass pre-employment drug &amp; alcohol testing</li><li>Able to lift 50 pounds</li><li>Comfortable working in various environments of manufacturing and contstruction</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.Join our fast-growing company with a small business feel.

Light Equipment Operator

POSITION SUMMARYThe primary function of the Crane Operator will be to assist in moving and lifting piping &amp; equipment necessary for fabrication support as well as module construction. In addition, the operator will also be required to perform various labour duties on the ground as needed when not operating the crane.PROJECT DETAILS<ul><li>Shop/ Module Yard work</li><li>Hours are 7am - 5pm, 50 hours/week</li><li>Shop Location Crossfield, Alberta</li></ul>CORE ACCOUNTABILITIES<ul><li>Operate cranes to lift, move, position or place equipment and materials (18-ton Carry Deck - 160 Ton RT)</li><li>Perform pre-operational inspection, and calculate crane capacities and weight to prepare for rigging and hoisting</li><li>Perform routine maintenance work such as cleaning and lubrication.</li><li>Assist other tradesmen with the completion of their duties when required</li><li>Other various responsibilities may be required</li></ul>QUALIFICATIONSEducation<ul><li>Valid Journeyperson Crane&nbsp;Operator&nbsp;certificate and minimum of two years of experience required</li></ul>Experience<ul><li>Experienced operator&nbsp;in industrial projects</li></ul>KNOWLEDGE, SKILLS, AND ABILITIES<ul><li>Must successfully complete pre-employment drug and alcohol testing</li><li>Developed analytical thinking and problem-solving skills</li><li>Familiar with construction methods, techniques, and labour requirements and how they apply to industrial construction projects</li><li>Proactively seeks and accomplishes tasks that lead to a safe, efficient, and productive work environment</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.Join our fast-growing company with a small business feel.

Crane Operator

Our manufacturing facility (Rostel Industries) currently has an opening at our southeast location. If you are enrolled in a post-secondary Machinist program and are ready to break ground on your new career and contribute to a manufacturing office environment, please read on… SummaryThe Machinist position at Rostel Industries reports to the Machine Shop Supervisor and is responsible for…Responsibilities<ul><li>Ensure cost-effective manufacture of components to the required standards and company objectives</li><li>The machining of components to specified drawings while maintaining quality and efficiency</li><li>May require overtime and shift work as decided by the department management</li></ul>Knowledge &amp; SkillsMust be willing to work in and participate in a conscious environmentMust be motivated and have good communication skillsCandidate must have a positive attitude with the ability to work well with others and on their ownProduce quality products based on engineering drawings with minimal defectsG code and conversational programmingFamiliarity with Mazatrol, Fanuc, Heidenhain and Fagor control is advantageousAPI/Grant Prideco rotary shoulder connection experience is an assetFamiliarity with SPC (Statistical Process Control) and assetEducationMust be a registered in a post-secondary Machinist training programRegistered Journeyman Machinist is considered an assetEquivalent recognized trainingExperienceCNC Lathe and/or Mill experience is requiredFamiliarity with Gibbs Cam software is a desirable assetExperience with oilfield, automotive or aviation manufacturing in a service/jobber shop environment is an assetIf this position interests you, and you feel like you’re the right person for the job, then please apply on our company website using the following link: <a href="https://performancemanager4.successfactors.com/sf/jobreq?jobId=32937&amp;company=precisiondril" target="_blank">Machinist Job Posting - Rostel Industries&nbsp;</a>Rostel Industries offers a comprehensive benefits package, including medical, dental, prescription drug, and life insurance.

Precision Drilling Corporation

Machinist

Rostel Industries, a division of Precision Drilling Canada Limited Partnership, has an opening for a&nbsp;Night Shift Machine Shop General Labourer&nbsp;eager to roll up their sleeves and contribute to a lively work environment. This position will work out of Precision's Manufacturing Shop in Southeast Calgary.Combined with a competitive remuneration package, you will enjoy the advantages of:<ul><li>Medical, dental, prescription drug, life insurance, Pension match, long-term disability coverage.</li><li>An inclusive work environment where you can enjoy a work-life balance promoting personal health, well-being, and family life!</li><li>Precision offers competitive time off packages as applicable.</li></ul> SummaryThe Machine Shop General Labourer will report to the Machine Shop Supervisor and Night Shift Lead Hand to assist with ad hoc requirements and cleaning needs within the shop bay.Responsibilities<ul><li>Assist Journeyman on site</li><li>Movement of material and equipment</li><li>Operation of metal bandsaw</li><li>Phosphating of various components</li><li>Stamping critical information on finished components</li><li>Operation of industrial metal bandsaw</li><li>Familiarity with measuring tools and equipment (imperial measurement familiarity preferred)</li><li>Covering job duties within the department (vacations and leaves)</li><li>Basic clean up and material co-ordination</li><li>Operation of forklift</li><li>Various other duties as required</li><li>Overtime as required</li></ul>Knowledge &amp; SkillsMust be willing to work in safety conscious environmentMust be motivated and have good communication skillsCandidate must have a positive attitude with the ability to work well with others and independentlyEducationA High School Diploma or GED equivalent is an assetExperience1 year of experience working within a manufacturing shop is preferredOilfield services experience is an assetAbility to work in a fast-paced, team environmentAccuracy and attention to detail with numbers are a mustForklift experience is a definite assetTraining available to the right candidate

Machine Shop Labourer

<h3>DESCRIPTION:</h3>The Supervisor is responsible for a majority of Grant-specific operations at customer locations. Supervisors will have full knowledge of regulatory guidelines, assist crew members where necessary, and report to the District Manager daily. Promote safe operations while on-site or in base locations. Be familiar with all types of equipment and the processes associated with Well Test Applications. Help organize personnel and equipment to complete job assignments. Demonstrates proficiency with all job-related paperwork. Provides guidance and training to less experienced personnel. As a Senior Supervisor, you will be required to work in remote locations for extended periods of up to 21 days at a time (12-hour shifts).<h3>DUTIES AND RESPONSIBILITIES:</h3><ul><li>Is an active participant in the company-related safety program and leads by example</li><li>Organizes personnel to complete job assignments.</li><li>Ensures successful completion of assigned jobs from start to finish</li><li>Ensures safe work practices through proper delegation of job duties and strict adherence to company safety policies and safe work practices.</li><li>Evaluates the work habits and job performance of assigned employees.</li><li>Manages assigned personnel at all times.</li><li>Organizes personnel to ensure maximum cost-effectiveness.</li><li>Motivates personnel to provide the best service possible to Grant PTS customers.</li><li>&nbsp;Communicate with assigned personnel to build a positive attitude toward their work and the company.</li><li>Provided training to less experienced personnel.</li><li>Utilizes Skills Passport and Training Matrix for personal growth and opportunity</li><li>Works with other supervisors to improve job performance.</li><li>Maintains all district test equipment in operational readiness at all times.</li><li>Performs preventative maintenance on equipment.</li><li>Performs regular scheduled maintenance on equipment when required.</li><li>Performs routine maintenance on vehicles and helps keep them clean and ready for use</li><li>Follows all government, industry, and company regulations and policies that affect the work</li><li>Makes recommendations on test equipment design changes to ensure efficient testing.</li><li>Organizes crew to ensure the highest quality of service</li><li>Controls crew activities to make efficient use of time and labor</li><li>Communicates with client to ensure successful job completion.</li><li>Controls test procedures and crew activities throughout the job.</li><li>Organizes crew to maintain safe work procedures and a clean work environment.</li><li>Presents reliable data to the client for their evaluation.</li><li>Promotes the service of Grant PTS through the execution of consistently high-quality service</li><li>Communicate with sales staff on possible future work.</li><li>Ensures all rental items, including sample cylinders, are returned post job</li></ul><h3>REQUIREMENTS:</h3><ul><li>Valid Drivers License</li><li>Fluent English</li><li>Current H2S &amp; First Aid (Confined Space &amp; Fall Protection assets but not required)</li><li>Minimum 4 Years of Well-Testing Experience</li></ul>

9 Operations / Facilities / Pipelines Jobs in Crossfield, AB T0M 0S0, Canada