field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work.Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation, proper configuration of downhole tools for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul> &nbsp;Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 5 years of direct industry experience &nbsp;</li><li>Industry related experience; coiled tubing, fracturing, drilling/service, or downhole tool operations&nbsp;</li><li>Proficient with Microsoft Office Suites&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement RequirementsDue to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor (Contractor)

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work. This position is liner hanger specific.&nbsp;Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation, proper configuration of downhole tools for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul>Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 8-12 years of experience on drilling rig and or tool experience; required&nbsp;</li><li>Industry related experience including; running Liner Hangers, Permanent Packers, Airlocks or Floatation collars, Toe Ports, Ball Drop systems and Sleeve systems in an Open Hole or Cemented Applications&nbsp;</li><li>Proficient with Microsoft Office Suites; Excel with experience building tallies&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement Requirements:&nbsp;Due to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor - Wellbore Construction (Contractor)

Job Summary&nbsp;The Field Service Supervisor is primarily responsible to support and mentor the Operations team by acting as front-line field support. They will be required to plan and execute high profile operations, with a focus on primary excellence and job quality. As a supervisor in the operation, they will be required to run all bottom hole assemblies in any area that NCS performs work.Key Areas of Responsibility&nbsp;<ul><li>Responsible for operation and proper configuration of downhole fracturing and completion tools and systems for intended job and well design&nbsp;</li><li>Ensure that operational specifications (limits) of the down hole tools are not exceeded&nbsp;</li><li>Ensures down hole tools and equipment are configured correctly for intended job&nbsp;</li><li>Liaise between cement services and energy company to ensure job success&nbsp;</li><li>Provides front-line support for customer with a high degree of professionalism&nbsp;</li><li>Communicate and work with customers, rig, cementers and other third-party personnel&nbsp;</li><li>Accurately complete job reports create tool assembly schematics, and field service orders upon completion of job in a timely manner&nbsp;</li><li>Report any non-conformance in a timely manner&nbsp;</li><li>Convey information and job details to co-workers at the end of each shift&nbsp;</li><li>Prepare equipment for each specific job&nbsp;</li><li>All NCS tools and equipment looked after in a professional manner</li><li>Help to promote safe work practices and higher standards of performance&nbsp;</li><li>Support and uphold HS&amp;E policies and procedures of NCS and the customer&nbsp;</li><li>Other duties, relevant to the position, shall be assigned as required&nbsp;</li></ul>Knowledge, Skills &amp; Abilities&nbsp;<ul><li>High School Diploma or GED equivalent; preferred&nbsp;</li><li>Technical Certificate/Diploma or Degree; preferred&nbsp;</li><li>Minimum of 5 years of direct industry experience &nbsp;</li><li>Industry related experience; coiled tubing, fracturing, drilling/service, or downhole tool operations&nbsp;</li><li>Proficient with Microsoft Office Suites&nbsp;</li><li>Work with other teams, and exhibit effective communication&nbsp;</li><li>Self-motivated with excellent organizational and time management skills&nbsp;</li><li>Ability to understand the importance of documentation&nbsp;</li><li>Excellent judgement, ability to plan ahead, high level of efficiency &amp; work ethic&nbsp;</li><li>Ability to handle multiple priorities simultaneously, manage priorities&nbsp;</li><li>Ability to handle stressful situations&nbsp;</li><li>Ability to perform job responsibilities in all weather conditions&nbsp;</li><li>Perform physical labour when necessary, in addition to standing or travelling for long periods of time&nbsp;</li><li>Ability to move or lift 25lbs – 50lbs&nbsp;</li><li>Valid Driver’s license; required&nbsp;</li></ul>Pre-Engagement RequirementsDue to the safety-sensitive nature of the work and its associated responsibilities, all contractors must meet the following pre-engagement requirements:Completion of both a drug and alcohol screening, as well as a Canadian Police Information Centre (CPIC) criminal check, is mandatory before any work can begin. These screenings will be arranged by the company and must be successfully passed for the contract to proceed.If you have a prior conviction, the CPIC check will return as incomplete, at which point an RCMP Certified Criminal Record Check will be required. As obtaining an RCMP Certified Criminal Record Check can take considerable time, we strongly recommend initiating the process as early as possible to avoid delays. The RCMP Check must be issued within the last 30 days and provided at your own expense before the contract can commence.Please note that the Contractor agreement is contingent upon the successful completion of all required screenings. Additionally, all documents outlined in the Master Service Agreement (MSA) must be submitted before any work can begin. Failure to meet these requirements may result in a delay or cancellation of the contract.

Field Service Supervisor, Frac Services (Contractor)

One thing you can rest assured of—at Goliath Snubbing, your expertise, skills, and dedication will never be taken for granted. We value every employee, always seeking to empower our workers to higher performance and higher quality, while protecting their safety.The environment can be intense. The challenge can be immense. But at Goliath Snubbing, these are the circumstances we thrive within. If you’re seeking a rewarding career that taps into your natural leadership abilities, technical prowess and more, then look no further!<h2>What does it take to work at Goliath Snubbing?</h2>Safety is a primary concern, as we constantly work in potentially hazardous environments and wish to keep both our clients and employees as protected as possible. At the same time, we never sacrifice the quality of our work—in fact adhering to industry regulations assures the constant top performance of our team.To become a part of the Goliath Snubbing team we require a minimum of four years oilfield experience and the following valid certifications:Occupational First Aid Level 1 BC and Alberta.Class 1 or Class 3 Drivers License.Fall Arrest.H2S Alive.GODI.Any other tickets will be considered and asset.Alongside all this, we highly prize individuals who distinguish themselves by bringing values such as integrity, passion, and foresight to the team.

Goliath Snubbing Team Member

Currently we are looking for Drillers and Assistant Drillers that have worked on automated or conventional singles.Our ADR-300 &amp; 400 AC rigs will be working in the Cold Lake / Bonnyville / Lloydminster area. Drilling multi-lateral wells and are forecasted to have work for the next year.&nbsp;In addition, we will be filling additional positions on our other ADR Singles as crews are moved and promoted.

DRILLERS AND ASSISTANT DRILLERS - AUTOMATED DRILLING RIG (ADR) - SINGLES

Bring your PLC technology skills and experience and join our Drilling Solutions team, with positions available in Canada and the US. Our Drilling Solutions team is responsible for developing and delivering a comprehensive technology suite to address today’s drilling challenges, optimizing and driving repeatable, reliable drilling performance and crew safety. Our cutting-edge technology unlocks the potential of our rig intelligence, algorithms, and machine learning.PLC Specialists take a lead role in deployment projects, developing electrical control systems, and providing remote technical support across global drilling divisions. Our Drilling Solutions team is one of the most innovative and creative teams in the industry — this is an exceptional opportunity to join an elite group of drilling technology professionals.We offer a comprehensive training and mentoring program that provides an outstanding career path within the team, division, and organization. Flexible work schedules are available, with even-time rotation or more conventional hours as options.If you thrive in a fast-paced environment, have 3 to 5 years of experience as a PLC Specialist in the oil and gas industry, and have earned either a PLC diploma or a bachelor’s degree (preferably in Engineering), we want to hear from you. Please click on the link below.CANADA: <a href="https://can242.dayforcehcm.com/CandidatePortal/en-US/ensignenergy/Posting/View/491" target="_blank">https://can242.dayforcehcm.com/CandidatePortal/en-US/ensignenergy/Posting/View/491</a>

PLC TECHNICIAN

JOB SUMMARYLocated in SW Manitoba, Saskatchewan, Alberta, Northern British Columbia - Floorhands are primarily responsible for handling drilling equipment on the drilling rig floor and keeping the rig and location clean and orderly.&nbsp;SPECIFIC RESPONSIBILITIES AND ACCOUNTABILITIES<ul><li>Assists the other crewmembers in their duties, including maintenance and repair of rig equipment, and he/she is a general all-around worker on the rig. There are usually two Floorhands on a crew, although smaller rigs may have only one. This is a manual labour position that involves making connections on the rig floor to connect and disconnect pipe smoothly and efficiently, assist with casing, and general housekeeping around the rig site.</li><li>Be prepared to work on a rotating shift schedule that operates twenty-four hours a day</li><li>Be able to work safely and quickly, and think ahead to the next procedure</li><li>Be in good physical condition (strength, coordination and agility are necessary)</li><li>Enjoy working as a member of a team and mentoring fellow crew members new to the rig</li><li>Committed to working remote operations involving camps, when required</li></ul>TECHNICAL COMPETENCIES<ul><li>Mechanical inclination</li><li>Safety minded</li></ul>BEHAVIORAL COMPETENCIES<ul><li>Proven ability to work safely and work with team members</li><li>Excellent communication skills</li><li>Ability to mentor less mechanically inclined personnel new to the rig</li></ul>EDUCATION AND EXPERIENCE<ul><li>Previous labour experience and/or experience as a floorhand (oil and gas industry preferred)</li><li>Associated training tickets for region and activity. These may include, but are not limited to: H2S Certification, First Aid, Common Safety Orientations</li><li>Ensign’s HR/HSE Induction and assigned training per Regional Training Matrix</li><li>Any client specific training for site access</li></ul>Other<ul><li>Business Ethics – Fully understands Ensign’s ethics policy and its application in all business dealings including contractual agreements and contract negotiations.</li><li>Health and Safety – Fully understands the Ensign Health and Safety policy and self-responsibility for his/her own health and safety at work.&nbsp; Responsible to avoid adversely affecting the health and safety of others through any act or omission.</li><li>Responsible for the correct use protective clothing and equipment as provided by Ensign and for guarding against misuse or damage to such equipment</li><li>Responsible for reporting any hazardous situations arising in the workplace that cannot be self-corrected, or injury incurred during the course of work, no matter how minor</li><li>Responsible for avoiding injury resulting from manual handling tasks associated with his/her employment, by use of risk assessment, correct mechanical handling equipment and correct manual handling technique</li></ul>

Floorhands (Western Canada)

JOB SUMMARYThe motorhand role works with the floorhand on the drilling rig floor, handling drilling equipment. This role is typicallyresponsible for the general maintenance and upkeep of the engines and other equipment on location. The motorhandworks closely with the floorhand and driller, and may relieve the driller once qualified to do so. If there is a designatedtrade person on site, the motorhand will assist with maintenance or focus their activities on working with thefloorhand(s) and assisting with other tasks.&nbsp;INTERNAL RELATIONSHIPSRig Manager, Driller, Derrickhand, Floorhand, Superintendent, Internal Service Personnel, HSE, HREXTERNAL RELATIONSHIPSClient Representatives, Third Party ServicesSPECIFIC RESPONSIBILITIES AND ACCOUNTABILITIES<ul><li>Maintains all engines and does all the general maintenance and repair around the rig</li><li>Ensuring that guards removed for maintenance purposes are replaced as soon as possible prior to the operation of the equipment</li><li>Maintain housekeeping around motors and oil house.&nbsp; Keep all oil and grease off the floor.&nbsp; Oilcans must be clean and water free</li><li>Checking that all fan belts are kept tight and report cooling system or oil leaks</li><li>Ensure that pop valves on the compressor are working properly</li><li>Never wash down the generator and electrical panels with a water hose at any time.&nbsp;</li><li>Keeping the Driller informed as to the need for hand tool repairs or replacement</li><li>Ensures that all covers are replaced on switches and connection boxes after repair</li><li>Checking and maintaining safety equipment, fire extinguishers and breathing apparatus</li><li>Ensuring that the tool rests used on stationary electric grinders are installed and no more than 3mm (1/8”) clearance between the tool rest and the wheel</li><li>Be prepared to work on a rotating shift schedule that operates 24 hours a day</li><li>Be well-coordinated</li><li>Be able to work safely and quickly, and think ahead to the next procedure</li><li>Be in good physical condition (strength and agility are necessary)</li><li>Enjoy working as a member of a team</li><li>Understand the some operations involve work at remote locations involving camps</li></ul>TECHNICAL COMPETENCIES<ul><li>Mechanical inclination</li><li>Safety minded</li></ul>BEHAVIORAL COMPETENCIES<ul><li>Proven ability to work safely and work with team members</li><li>Excellent communication skills</li><li>Ability to mentor less experienced and less mechanically inclined personnel new to rig</li></ul>EDUCATION AND EXPERIENCE<ul><li>Previous motorhand experience required</li><li>Associated training tickets for region and activity. These may include, but are not limited to: H2S Certification, First Aid, Common Safety Orientations</li><li>Ensign’s HR/HSE Induction and assigned training per Regional Training Matrix</li><li>Any client specific training for site access</li></ul>QUALIFICATIONS<ul><li>Required Certification:</li><li>H2S Alive</li><li>Standard First Aid</li><li>Fall Protection / Rig Rescue</li><li>Special Oilwell boilers</li><li>Loader Operator Training</li><li>EnCAAP</li><li>Certificates depending on the type of well &amp; location</li><li>Must complete Ensign’s HR/HSE Induction Orientation</li><li>Any Site specific training required by Operator</li><li>Able to communicate effectively and take instruction from others</li><li>Previous Motorhand experience</li><li>Ability to lift and carry up to 100 pounds daily</li></ul>OTHER ACCOUNTABILITIES<ul><li>Business Ethics – Understands fully Ensign’s ethics policy and its application in all business dealings including contractual agreements and contract negotiations</li><li>Business Policies - Understands and agrees to follow all of Ensign’s Policy and Directives and procedures as set forth in the Ensign Company Policy and Basic Directives Handbook for Employees</li><li>Certifications – Maintains technical and safety certifications required by company or government agencies; remains current on all OSHA, EUSD and other required training</li><li>Drug-free workplace - Conforms to a drug-free workplace, not be under the influence of mind-altering prescription or non-prescription drugs, including alcohol and other drugs of abuse.</li><li>Occupational Health and Safety – Understands fully the Ensign Health and Safety policy and self-responsibility for own health and safety at work;&nbsp; Demonstrates responsibility to avoid adversely affecting the health and safety of others through any act or omission<ul><li>Uses the correct protective clothing and equipment as provided by Ensign and guards against misuse or damage to such equipment</li><li>Reports any hazardous situations arising in the workplace that cannot be self-corrected, or injury incurred during the course of work, no matter how minor</li></ul></li><li>Avoids injury resulting from manual handling tasks, by use of risk assessment, correct mechanical handling equipment and correct manual handling techniques</li></ul>

Motorhand (Western Canada)

JOB SUMMARYA Derrickhand works up the derrick on the drilling rig and guides drill string or casing. They also monitor tank levels, add chemicals and take care of shale shakers and mud pumps.INTERNAL RELATIONSHIPSRig Manager, Driller, Motorhand, Floorhand, Superintendent, Internal Service Personnel, HSE, HREXTERNAL RELATIONSHIPSClient Representatives, Third Party ServicesSPECIFIC RESPONSIBILITIES AND ACCOUNTABILITIES<ul><li>Derrickhands must use a harness and platform-climbing device to get to the proper position on the derrick when the drill string (lengths of pipe) or casing pipe is being raised from or lowered into the hole.&nbsp; Individuals who do not feel comfortable working in high places do not usually move into the position of Derrickhand.&nbsp; However those wishing to advance to the Driller position must have a good understanding of the Derrickhands duties.</li><li>When rig is making a trip (running drill pipe in and out of the hole), he works off of the monkey board.&nbsp; There, while coming out of the hole, he unlatches the elevators from the pipe and racks the pipe sequentially in the fingers after it has been set on the pipe-racking floor by the Floorhand.&nbsp; While running in the hole, he pulls the proper stand of pipe from the fingers and, when the elevator comes to his position latches it around the stand.&nbsp; Whenever a Derrickhand goes up the monkey board the blocks stay at the rig floor until the Derrickhand comes to the end of the driving board and signals to the Driller that his fall arrest system is hooked up.&nbsp; Under direction of the Driller, he conditions the drilling fluid and maintains the mud pumps and mud handling and treating equipment.</li><li>Performing all duties in a safe manner. Handling all miscellaneous duties above the derrick floor, lubrication of the hoisting equipment, stringing of lines, and minor repairs to the hoisting equipment and derrick.</li><li>Assisting the Driller in the maintenance of the drilling rig and other equipment</li><li>Become familiar with the work of the Drill as time permits</li><li>Inspecting and reporting to the Driller the condition of the derrick and derrick fall arrest equipment</li><li>The morning and evening tour Derrickhand must note and report changes in the condition of the derrick or hazards that have developed during their tour</li><li>Ensure anyone climbing the derrick uses a full body harness and fall protection above 3 meters</li><li>Derrickhand should never be out of racking fingers when travelling block and hook are passing.&nbsp; Pipe left standing in the derrick should be securely tied.</li><li>Derrickhand will change shifts on the rig floor, not on the monkey board.</li></ul>TECHNICAL COMPETENCIES<ul><li>Mechanical inclination</li><li>Safety minded</li><li>Ability to work at heights</li></ul>BEHAVIORAL COMPETENCIES<ul><li>Proven ability to work safely and work with team members</li><li>Excellent communication skills</li><li>Excellent ability to monitor multiple activities at the same time</li><li>Ability to mentor less experienced and less mechanically inclined personnel new to rig</li></ul>EDUCATION AND EXPERIENCE<ul><li>Previous derrickhand experience required</li><li>Associated training tickets for region and activity. These may include, but are not limited to: H2S Certification, First Aid, Common Safety Orientations</li><li>Ensign’s HR/HSE Induction and assigned training per Regional Training Matrix</li><li>Any client specific training for site access</li></ul>QUALIFICATIONS<ul><li>Required Qualifications and Certifications:</li><li>H2S Alive</li><li>Standard First Aid</li><li>Fall Protection / Rig Rescue</li><li>Special Oilwell boilers</li><li>Loader Operator Training</li><li>Valid Driver’s License and Transportation</li><li>EnCAAP</li><li>Certificates depending on the type of well &amp; location</li><li>Must complete Ensign’s HR/HSE Induction Orientation</li><li>Any Site specific training required by Operator</li><li>Able to communicate effectively and take instruction from others</li><li>Previous Derrickhand experience</li><li>Ability to lift and carry up to 100 pounds daily</li></ul>OTHER ACCOUNTABILITIES<ul><li>Business Ethics – Understands fully Ensign’s ethics policy and its application in all business dealings including contractual agreements and contract negotiations</li><li>Business Policies - Understands and agrees to follow all of Ensign’s Policy and Directives and procedures as set forth in the Ensign Company Policy and Basic Directives Handbook for Employees</li><li>Certifications – Maintains technical and safety certifications required by company or government agencies; remains current on all OSHA, EUSD and other required training</li><li>Drug-free workplace - Conforms to a drug-free workplace, not be under the influence of mind-altering prescription or non-prescription drugs, including alcohol and other drugs of abuse.</li><li>Occupational Health and Safety – Understands fully the Ensign Health and Safety policy and self-responsibility for own health and safety at work;&nbsp; Demonstrates responsibility to avoid adversely affecting the health and safety of others through any act or omission<ul><li>Uses the correct protective clothing and equipment as provided by Ensign and guards against misuse or damage to such equipment</li><li>Reports any hazardous situations arising in the workplace that cannot be self-corrected, or injury incurred during the course of work, no matter how minor</li></ul></li><li>Avoids injury resulting from manual handling tasks, by use of risk assessment, correct mechanical handling equipment and correct manual handling techniques</li></ul>

Derrickhand (Western Canada)

At Ensign, we are not just looking for anybody. Anybody can get a job anywhere. Our teams are made up of people who have each other’s back. Always. Who work harder, and smarter. Who take pride in a hard day’s work, and a job done right. Are resourceful. Can think on their feet. Who understand the buck stops here. Who understand what it means to Dig Deep®.Why Work for Us:<ul><li>Competitive industry wage</li><li>Single/family benefit package</li><li>Personal Protective Equipment (PPE) is supplied</li><li>Opportunity for training and career development</li></ul>What we are looking for:<ul><li>Recent well servicing rig experience working as a Floorhand, Derrickhand or Operator</li><li>Class 5 Driver’s License (without GDL)</li><li>Abstract with less than 6 demerits is required</li><li>Valid safety certificates required (H2S Alive, Common Safety Orientation (CSO), Standard First Aid etc.)</li><li>Applicants will be required to pass physical capacity test and an alcohol and drug test</li></ul>What you will be doing:<ul><li>Monitoring and maintaining proper well control characteristics</li><li>Guiding the pipe off the racking platform while tripping in and out of the hole</li><li>Rigging up pump, pump lines and accumulator lines properly</li><li>Assisting in cleaning and painting as required by the Operator/Rig Manager</li><li>Assisting in moving the rig, rigging up and rigging out.</li></ul>Other Accountabilities:<ul><li>Business Ethics – Understands fully Ensign’s ethics policy and its application in all business dealings including contractual agreements and contract negotiations</li><li>Business Policies - Understands and agrees to follow all of Ensign’s Policy and Directives and procedures as set forth in the Ensign Company Policy and Basic Directives Handbook for Employees</li><li>Certifications – Maintains technical and safety certifications required by company or government agencies; remains current on all OSHA, EUSD and other required training</li><li>Drug-free workplace - Conforms to a drug-free workplace, not be under the influence of mind-altering prescription or non-prescription drugs, including alcohol and other drugs of abuse.</li><li>Occupational Health and Safety – Understands fully the Ensign Health and Safety policy and self-responsibility for own health and safety at work; Demonstrates responsibility to avoid adversely affecting the health and safety of others through any act or omission<ul><li>Uses the correct protective clothing and equipment as provided by Ensign and guards against misuse or damage to such equipment</li><li>Reports any hazardous situations arising in the workplace that cannot be self-corrected, or injury incurred during the course of work, no matter how minor</li><li>Avoids injury resulting from manual handling tasks, by use of risk assessment, correct mechanical handling equipment and correct manual handling techniques</li></ul></li></ul>Ensign Energy Services Inc. is one of the world’s top land-based drilling and well servicing contractors, currently operating in Canada, the United States, Australia, and internationally. Our people are equipped with advanced technology, empowered by a culture of safety and innovation, and driven by a single-minded commitment to service. Through consistent performance, we deliver safe and reliable solutions, worldwide.

82 Operations / Facilities / Pipelines Jobs