field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

SUMMARY &nbsp;Press, assemble and pack shaped charges using provided components according to written work instructions. &nbsp;ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. &nbsp;Other duties may be assigned.<ul><li>Determine correct components to be used during the pressing process against written work instructions and engineering data sheets.</li><li>Transfer cases from pallet to dolly and charges from press area to the test area.</li><li>Transfer explosive powder bins from refill area to work area.</li><li>Operate press lever and slide dies on press table.</li><li>Conduct visual in-process inspection on manufactured components.</li><li>Utilize tools to cut bands on pallets and scoop mixing powders.</li><li>Load components with explosive powders.</li><li>Weigh explosive load to be pressed and placed into components.</li><li>Complete necessary production and quality control paperwork at the end of each shift.</li><li>Maintain clean work area.</li><li>Assemble components according to written instructions.</li><li>Conduct visual process inspection on components being assembled.</li><li>Report problems to shift supervisor.</li><li>Pack completed products according to work instructions.</li><li>Willingness and ability to follow instructions.</li><li>Work overtime when necessary.</li><li>Work on a team.</li><li>Transport, stack and paint liners.</li><li>Wear 100% cotton clothing (detonators only)</li><li>Other duties as required.</li></ul> &nbsp;EDUCATION AND EXPERIENCEHigh school diploma or GED preferred. &nbsp;PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. &nbsp;Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.<ul><li>While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear.</li><li>The employee must regularly lift and/or move, with help, up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and depth perception.</li><li>Ability to wear all required personal protective equipment including:</li><li>Safety glasses</li><li>Hearing protection</li><li>Powdered latex gloves</li><li>Respirator (must pass respirator test) and/or dust mask</li><li>Steel toe shoes</li><li>Ability to perform intricate hand assembly.</li></ul>WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. &nbsp;Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.<ul><li>While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and explosive materials. &nbsp;The employee may also be exposed to toxic or caustic chemicals</li><li>The noise level in the work environment is usually moderately loud. &nbsp;Hearing protection is required.</li></ul>Core Laboratories, including all of its affiliated and related entities, is an equal opportunity employer and is committed to creating an inclusive environment for everyone. Employment decisions are made regardless of characteristics including, but not limited to, race, color, sex, sexual orientation, gender identity, national origin, age, disability, religion, genetic information, protected veteran or uniformed service member status, and any other characteristic protected under applicable law.

Presser I

POSITION SUMMARYApprentice Ironworkers assist in laying out, installing, and fabricating structural steel in live and greenfield environments. Work assignments include cutting steel, interpreting blueprints, rigging, directing cranes, assisting welders, and setting structural steel.Employees are expected to support and participate in a “culture of safety” and adhere to and be ambassadors of Strike’s Code of Conduct and Values, and to treat others with dignity, respect, and fairness.PROJECT DETAILSProject Name: Mount Bracey Compressor StationNearest City: Prince George, B.C (Camp Project)Shift: 14 Days on/7 Days offTravel pay: $400/shiftCamp retention: $25/dayCORE ACCOUNTABILITIES<ul><li>Read&nbsp;blueprints and specifications to lay out the work</li><li>Assemble and erect prefabricated structural supports</li><li>Signal crane operators to position steel units according to&nbsp;plan</li><li>Erect and install, hoisting, equipment install, and rigging</li><li>Position steel units, align holes, and insert temporary bolts</li><li>Unload and install pre-cast components</li><li>Performs physically demanding tasks such as lifting and moving structural steel/plates while standing for extended periods of time and securing steel in hard-to-reach areas</li><li>Identifies, initiates, recommends, and assists in issue resolution processes</li><li>Identify, recognize, and demonstrate safe usage of power tools and hand tools appropriate for the&nbsp;work being done</li><li>Perform other labour duties as required</li></ul>QUALIFICATIONSEducation<ul><li>Must be a registered Apprentice with the appropriate provincial or federal authority</li></ul>Experience<ul><li>Previous construction experiences an asset</li><li>Experience working at heights an asset</li></ul>SKILLS, KNOWLEDGE, &amp; ABILITIES<ul><li>Must be able to pass pre-employment drug &amp; alcohol testing</li><li>Able to lift 50 pounds</li><li>Comfortable working outdoors</li></ul>Safety Tickets Required<ul><li>CSTS 2020 or Common Safety Orientation (CSO).&nbsp;</li><li>Bear or Wildlife Awareness course</li><li>Standard First Aid CPR-C &amp; AED (St. John Ambulance or Canadian Red Cross) or WorkSafe BC Occupational First Aid Level 1 (OFA 1) Training Certificate</li><li>WHIMIS 2015 (Strike can provide when onboarding)</li><li>Transportation of Dangerous Goods – TDG (Strike can provide when onboarding)</li><li>Fall Protection Training</li><li>Aerial Work Platform Training</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike, we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at the Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike, we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety-focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law.Join our fast-growing company with a small business feel.

Strike Group

Strike Group Limited Partnership

Apprentice Ironworker

POSITION SUMMARYWorking within Strike's Project Group, Journeyperson Ironworkers assist in laying out, installing and fabricating structural steel in live and greenfield environments. Work assignments include cutting steel, interpreting blueprints, rigging, directing cranes, assisting welders and setting structural steel.Employees are expected to support and participate in a “culture of safety” and adhere to and be ambassadors of Strike’s Code of Conduct and Values, and to treat others with dignity, respect and fairness.PROJECT DETAILS<ul><li>Project Name: Mount Bracey Compressor Station</li><li>Nearest City: Prince George, B.C (Camp Project)</li><li>Shift: 14 Days on/7 Days off</li><li>Travel pay: $400/shift</li><li>Camp retention: $25/day</li></ul>CORE ACCOUNTABILITIES<ul><li>Read&nbsp;blueprints and specifications to lay out the work</li><li>Assemble and erect pre-fabricated structural supports</li><li>Signal crane operator to position steel units according to&nbsp;</li><li>Erect and install hoisting, equipment and rigging</li><li>Position steel units, align holes and insert temporary bolts</li><li>Unload and install pre-cast components</li><li>Performs physically demanding tasks such as lifting and moving structural steel/plates while standing for extended periods of time and securing steel in hard to reach areas</li><li>Identifies, initiates, recommends, and assists in issue resolution processes</li><li>Identify, recognize, and demonstrate safe usage of power tools and hand tools appropriate for the job</li><li>May perform other related duties as assigned</li><li>Work with non-destructive Testing Inspector</li><li>Conduct repairs, modifications, and retrofits</li><li>Monitor parts usage and report on any material issues</li></ul>QUALIFICATIONS Education<ul><li>Possess a valid Journeyperson certificate of qualification issued by the appropriate provincial or federal authority&nbsp;&nbsp;</li></ul>Experience<ul><li>Must have experience working at heights</li><li>Previous construction experience would be considered an asset</li></ul>SKILLS, KNOWLEDGE, &amp; ABILITIES<ul><li>Must successfully complete pre-employment drug and alcohol testing</li><li>Capable of working as part of a team</li><li>Fluent in speaking and reading&nbsp;English</li><li>Must be able to follow directions</li></ul>Safety Tickets Required<ul><li>CSTS 2020 or Common Safety Orientation (CSO)</li><li>Bear or Wildlife Awareness course</li><li>Standard First Aid CPR-C &amp; AED (St. John Ambulance or Canadian Red Cross) or WorkSafe BC Occupational First Aid Level 1 (OFA 1) Training Certificate</li><li>WHIMIS 2015 (Strike can provide when onboarding)</li><li>Transportation of Dangerous Goods – TDG (Strike can provide when onboarding)</li><li>Fall Protection Training</li><li>Arial Work Platform Training</li><li>Telehandler training is required if you will be operating equipment.</li><li>Overhead Crane certification training – not mandatory but good to have</li><li>Hoisting and Rigging Training</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.Join our fast-growing company with a small business feel.

Journeyperson Ironworker

POSITION SUMMARYApprentice Ironworkers assist in laying out, installing, and fabricating structural steel in live and greenfield environments. Work assignments include cutting steel, interpreting blueprints, rigging, directing cranes, assisting welders, and setting structural steel.Employees are expected to support and participate in a “culture of safety” and adhere to and be ambassadors of Strike’s Code of Conduct and Values, and to treat others with dignity, respect, and fairness.PROJECT DETAILS<ul><li>Projects located in the Fort St. John area</li><li>Local candidates preferred</li><li>LOA provided for non-local candidates</li><li>$500/shift travel allowance</li><li>15/6 rotation with potential for longer outage shifts</li></ul>CORE ACCOUNTABILITIES<ul><li>Read&nbsp;blueprints and specifications to lay out the work</li><li>Assemble and erect prefabricated structural supports</li><li>Signal crane operators to position steel units according to&nbsp;plan</li><li>Erect and install, hoisting, equipment install, and rigging</li><li>Position steel units, align holes, and insert temporary bolts</li><li>Unload and install pre-cast components</li><li>Performs physically demanding tasks such as lifting and moving structural steel/plates while standing for extended periods of time and securing steel in hard-to-reach areas</li><li>Identifies, initiates, recommends, and assists in issue resolution processes</li><li>Identify, recognize, and demonstrate safe usage of power tools and hand tools appropriate for the&nbsp;work being done</li><li>Perform other labour duties as required</li></ul>QUALIFICATIONSEducation<ul><li>Must be a registered Apprentice with the appropriate provincial or federal authority.</li></ul>SKILLS, KNOWLEDGE, &amp; ABILITIES<ul><li>Must be able to pass pre-employment drug &amp; alcohol testing.</li><li>Able to lift 50 pounds.</li><li>Comfortable working outdoors</li><li>Comfortable working in confined space environments</li><li>Aerial Work Platform Training</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike, we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at the Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike, we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety-focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law.Join our fast-growing company with a small business feel.

POSITION SUMMARYWorking within Strike's Project Group, Journeyperson Ironworkers assist in laying out, installing and fabricating structural steel in live and greenfield environments. Work assignments include cutting steel, interpreting blueprints, rigging, directing cranes, assisting welders and setting structural steel.Employees are expected to support and participate in a “culture of safety” and adhere to and be ambassadors of Strike’s Code of Conduct and Values, and to treat others with dignity, respect and fairness.PROJECT DETAILS<ul><li>Projects located in the Fort St. John area</li><li>Local candidates preferred</li><li>LOA provided for non-local candidates</li><li>$500/shift travel allowance</li><li>15/6 rotation with potential for longer outage shifts</li></ul>CORE ACCOUNTABILITIES<ul><li>Read&nbsp;blueprints and specifications to lay out the work</li><li>Assemble and erect pre-fabricated structural supports</li><li>Signal crane operator to position steel units according to&nbsp;</li><li>Erect and install hoisting, equipment and rigging</li><li>Position steel units, align holes and insert temporary bolts</li><li>Unload and install pre-cast components</li><li>Performs physically demanding tasks such as lifting and moving structural steel/plates while standing for extended periods of time and securing steel in hard to reach areas</li><li>Identifies, initiates, recommends, and assists in issue resolution processes</li><li>Identify, recognize, and demonstrate safe usage of power tools and hand tools appropriate for the job</li><li>May perform other related duties as assigned</li><li>Work with non-destructive Testing Inspector</li><li>Conduct repairs, modifications, and retrofits</li><li>Monitor parts usage and report on any material issues</li></ul>QUALIFICATIONS Education<ul><li>Possess a valid Journeyperson certificate of qualification issued by the appropriate provincial or federal authority&nbsp;&nbsp;</li></ul>SKILLS, KNOWLEDGE, &amp; ABILITIES<ul><li>Must successfully complete pre-employment drug and alcohol testing</li><li>Capable of working as part of a team</li><li>Fluent in speaking and reading&nbsp;English</li><li>Must be able to follow directions</li></ul>Why work for Strike:Based in Western Canada with a head office in Calgary, Alberta, we provide energy and industrial construction and maintenance services across the largest geographical area in Canada.At Strike we continuously demonstrate leadership, drive, creativity, and initiative. This has been shown through the recognition of being named one of Canada's Best Managed Companies since 2007, and then later recognized at Platinum Level for Canada’s Best Managed Companies distinction since 2018.Our team is comprised of loyal, supportive, and forward-thinking industry professionals. We foster a stable, safe, and community-minded environment where you can embrace professional development and maximize your upward mobility. At Strike we also reward our own people for their continuous commitment, energy, enthusiasm, and results. Our culture at Strike is highly important to us, which is why we make many efforts to support those employed at Strike.Strike’s main value is that every employee gets home safe. We are a safety focused company that allows our employees to work efficiently with the safest equipment and procedures. At Strike, we have created a community that supports the importance of physical and mental health. As we value the importance of treating others as we wish to be treated, Strike has a welcoming and inclusive team.Strike Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.Join our fast-growing company with a small business feel.

<h3>Description</h3>Internal Candidates - please apply by logging in to UltiPro. External Candidates - please apply with the Apply Now button.The Assembly Technician will be responsible for assembling, stamping, and testing Surface Safety Systems products in accordance with work order requirements.&nbsp;Key position functions include:<ul><li>Responsible to ensure assembly and testing meet work order requirements.</li><li>Paint and/or coat products.</li><li>Test parts, apply name plate and/or stamping.</li><li>Identify non-conformances by separation and/or marking.</li><li>Check all calibration is accurate and re-calibrate as necessary.</li><li>Operate various engraving systems.</li><li>Maintain workstation and equipment to an acceptable Stream-Flo standard of cleanliness.</li><li>Follow all work order and process traveler requirements and fill out job sheets or record time using ERP system.</li><li>Report all machine, crane and hoist problems in the proper maintenance logs and notify Maintenance Department and/or lead hand/supervisor of a down time situation.</li><li>Ensure processes and testing operations are performed in accordance with safety regulations and are carried out in a conscientious manner.</li><li>Perform other duties assigned by Lead Hand/Supervisor.</li></ul>Preferred candidates will possess a combination of the following:<ul><li>High school diploma with a mechanical aptitude.</li><li>Related assembly, testing and painting experience an asset.</li><li>Mechanical assembly/repair experience an asset.</li><li>Read and understand engineering drawings, technical documents and flow diagrams an asset.</li><li>Forklift experience an asset.</li><li>Computer skills using MS Office applications (Word, Outlook, Excel); knowledge of ERP systems an asset.</li><li>Strong commitment to workplace health and safety.</li><li>Detail oriented and a strong work ethic.</li><li>Good communication (written and verbal), interpersonal and organizational skills.</li><li>Self-motivated and ability to prioritize.</li><li>Ability to multi-task and work in a fast-paced, team environment.</li></ul>The Stream-Flo Group of Companies, consisting of Stream-Flo Industries Ltd. and Master Flo Valve Inc., are privately owned and operated Canadian manufacturers of wellhead, production gate valve and check valve equipment, as well as chokes, specialty control valves and supporting actuation. Since our inception in 1962, we have become a recognized leader for our superior technology, innovative designs and top quality products. Through continued product line development, the Stream-Flo Group has grown to be one of the largest manufacturers of our kind, offering our solutions to oil and gas regions throughout the world.Stream-Flo offers a competitive salary, profit sharing and a comprehensive benefit program to prospective employees, as well as the opportunity to work in an entrepreneurial environment, characterized by continued growth and strong business results.We thank all applicants for their interest. However only those candidates identified for further consideration will be contacted.

Stream-Flo Industries Ltd

Careers at Stream-Flo

Gate Valve & Wellhead Assembly

Service Technicians - Wellhead & Frac Support

Wellhead Manufacturing

Assembly Technician - Surface Safety Systems 

<h3>Description</h3>Internal Candidates - please apply by logging in to UltiPro.External&nbsp;Candidates - please apply with the Apply Now button.Reporting to the Assembly, Test and Paint (ATP) Supervisor, the Assembly Technician will be responsible for providing quality workmanship on the assembly testing and painting of Company products while maintaining high standards.Key position functions include:<ul><li>Assembles, stamps and tests wellhead components in accordance with work order requirements.</li><li>Ensure processes and testing operations are performed in accordance with safety regulations and are carried out in a conscientious manner.</li><li>Responsible to ensure assembly and testing meet work order requirements.</li><li>Identify non-conformance's by separation and/or marking.</li><li>Maintain workstation and equipment to an acceptable Stream-Flo standard of cleanliness.</li><li>Follow work order and process traveler requirements and fill out job sheets or record time using ERP system.</li><li>Report all machine, crane and hoist problems in the proper maintenance logs and notify Maintenance Department and/or lead hand/supervisor of a down time situation.</li><li>Perform other duties assigned by Lead Hand / Supervisor.</li></ul>Preferred candidates will possess a combination of the following:<ul><li>High School Diploma with relevant experience with wellhead equipment and oilfield industry preferred.</li><li>Mechanically inclined.</li><li>Ability to operate a forklift.</li><li>Attention to detail.</li><li>Self-motivated, able to prioritize and possess strong organizational skills.</li><li>Ability to multi-task and work in a fast-paced environment.</li><li>Work with minimum of supervision.</li></ul>The Stream-Flo Group of Companies, consisting of Stream-Flo Industries Ltd. and Master Flo Valve Inc., are privately owned and operated Canadian manufacturers of wellhead, production gate valve and check valve equipment, as well as chokes, specialty control valves and supporting actuation. Since our inception in 1962, we have become a recognized leader for our superior technology, innovative designs and top quality products. Through continued product line development, the Stream-Flo Group has grown to be one of the largest manufacturers of our kind, offering our solutions to oil and gas regions throughout the world.Stream-Flo offers a competitive salary, profit sharing and a comprehensive benefit program to prospective employees, as well as the opportunity to work in an entrepreneurial environment, characterized by continued growth and strong business results.We thank all applicants for their interest. However, only those candidates identified for further consideration will be contacted.

7 Operator Jobs in Canada